This listing is for a USED ASTRAGAUGE ASTRA-A-3-316-SS. It is designed for high-pressure measurement in industrial and hydraulic systems. This unit is categorized as a pressure gauge and includes the following capabilities: 316 stainless steel construction, 100000 PSI rating, and compact dial design.

This listing is for a New ASCO T137834 Solenoid Valve.

The ASCO T137834 is a high-performance solenoid valve designed for precise control of air, gas, water, or light oil in industrial automation systems. Known for its reliability and fast response time, this valve is ideal for use in general service applications, including fluid power systems, HVAC, and process control.

See photos for details.

Part No: T137834
Type: Solenoid Valve
Condition: New
Operation: Electromagnetic (Solenoid-Actuated)
Body Material: Likely Brass or Stainless Steel (verify on unit)
Port Size: Typically 1/4″ or 1/2″ NPT (verify on unit)
Voltage: Commonly 120V AC or 24V DC (verify on coil)
Media: Air, Water, Light Oil, Inert Gases
Mounting: Inline
Response Time: Fast-Acting
Applications: Industrial Automation, HVAC, Fluid Control Systems

Please message us with any questions.

This listing is for a USED ALLEN BRADLEY 1494C-CM2. It is designed as a cable mechanism for use with flange-mounted disconnect switches. This unit is categorized as a switch accessory and includes the following capabilities: mechanical linkage support, Series B compatibility, and panel mounting.

This listing is for a New TSUBAKI RS60-1-CP-U. It is designed as a single strand ANSI roller chain for industrial power transmission systems. This unit is categorized as a Roller Chain and includes the following capabilities: 160 links, 10-foot length, 3/4″ pitch, clip-style connecting link.

This listing is for a USED ALLIGATOR 0456-OFMV. It is designed for low-profile belt splicing in conveyor systems. This unit is categorized as a Mechanical Belt Lacing Fastener and includes the following capabilities: up to 200 PIW rating, removable hinge pin, and vice-like tooth engagement.

This listing is for a NEW INA RDC-099912.
Radial insert ball bearing housing unit with sealed deep groove ball bearing and cast housing. Designed for industrial applications requiring static misalignment compensation and reliable performance under moderate loads.
See photos for details.
Part No: RDC-099912
Type: Radial Insert Ball Bearing Housing Unit
Condition: NEW
Bearing Type: Deep Groove Ball Bearing
Locking Mechanism: Eccentric Collar or Grub Screws
Sealing: Multi-Piece Seals
Housing Material: Cast Iron or Sheet Steel
Please message us with any questions.

This listing is for a USED BOSCH 1 825 503 268.

Industrial pneumatic valve designed for directional control of compressed air in automation systems. Compact and durable, suitable for manifold or inline mounting.

See photos for details.

Part No: 1 825 503 268
Type: Pneumatic Directional Valve
Condition: USED
Likely 5/2 or 5/3-Way Configuration
Aluminum Body
Compact Industrial Design
Please message us with any questions.

The Hathaspace HSP001 is a Smart True HEPA Air Purifier designed for home and office use, specifically for rooms up to 700 sq. ft. It offers a multi-stage filtration system to clean the air and remove various airborne pollutants.

This listing is for a NEW RITTAL TS 8612.650. It is designed for mounting components inside TS series enclosures. This unit is categorized as a mounting chassis and includes the following capabilities: 500mm width, steel construction, and compatibility with TS system frames.

This listing is for a NEW RITTAL TS 8612.660. It is designed for mounting and support within TS series enclosure systems. This unit is categorized as a dual system chassis bracket and includes the following capabilities: steel construction, dual mounting configuration, and compatibility with TS enclosure frames.

This listing is for a NEW BROWNING VF4S-131. It is designed for mounting on machinery frames to support rotating shafts. This unit is categorized as a 4-bolt flange bearing and includes the following capabilities: 1-15/16″ bore, cast iron housing, and ball bearing insert.

Dodge 124613 LF-SC-107 light-duty flange ball bearing, featuring a 3-bolt configuration, now available. Perfect for light-duty applications, this brand-new unit ensures premium quality and reliable performance.

This listing is for a NEW B-LOC SERIES B400 85x125mm. It is designed for secure shaft-to-hub connections in rotating equipment. This unit is categorized as a Shaft Locking Device and includes the following capabilities: 85mm bore diameter, 125mm outer diameter, and corrosion-resistant steel construction.

This listing is for a NEW B-LOC SERIES B400 100x145mm. It is designed for secure shaft-to-hub connections in rotating equipment. This unit is categorized as a Shaft Locking Device and includes the following capabilities: 100mm bore diameter, 145mm outer diameter, and corrosion-resistant steel construction.

This listing is for a New ENIDINE LROEMXT 3/4 x 1 XTREME. It is designed for energy absorption and vibration damping in industrial machinery. This unit is categorized as a shock absorber and includes the following capabilities: XTREME series durability, 3/4″ x 1″ size, and high-cycle performance.

This listing is for a used POWERFIST 8 Ton Clevis Bottom Long Ram Hydraulic Jack.
Heavy-duty hydraulic jack ideal for use with engine hoists, cranes, and shop equipment.

Item is clean and was removed from a working system. See photos for details.

Part No: N/A
Type: Long Ram Hydraulic Jack
Condition: USED
Capacity: 8 Ton
Clevis-Style Base
Pneumatic/Hydraulic Operation
Long Ram Design for Extended Reach

Please message us with any questions.

This listing is for a USED BIMBA FO-501-CMT Flat-1 Pneumatic Cylinder.

Compact, double-acting pneumatic cylinder designed for tight-space industrial automation applications. Features a 2″ bore, 1″ stroke, magnetic piston, and rugged stainless steel construction.

See photos for details.

Part No: FO-501-CMT
Type: Flat-1 Pneumatic Cylinder
Condition: USED
Bore Size: 2 inches
Stroke Length: 1 inch
Double Acting, Single Rod
Magnetic Piston
1/2-13 UNC Male Rod Thread
2 x 1/4″ NPT Ports
Please message us with any questions.

Timken bearings, model AX655578HSP, in pristine new condition. Ideal for enhancing machinery performance. Perfect for industries requiring reliable, high-quality components. Ensure optimal operations with these premium bearings.

This listing is for a Used TYCO PTMVIS-402-2084-002.

This is a 2-valve manifold from the PTM series, designed for use with pressure transmitters. It features one block valve and one vent/test valve, providing safe and efficient isolation and calibration of pressure instruments. The robust stainless steel construction ensures durability in demanding industrial environments.

See photos for details.

Part No: PTMVIS-402-2084-002
Type: 2-Valve Manifold
Condition: Used
Valves: 1 Block, 1 Vent/Test
Connections: 1/2″ FNPT Process x 1/2″ FNPT Instrument
Body Material: 316 Stainless Steel
Packing: Teflon
Seat: Integral
Max Pressure: 6000 PSIG @ 200°F, 4000 PSIG @ 500°F
Mounting: Surface or bracket mountable
Application: Pressure transmitter isolation and calibration

Please message us with any questions.

New NACHI 22308EXQ bearings available now. These high-quality bearings, known for their reliability and efficiency, are in pristine condition. Ideal for various industrial applications demanding durability and performance.

This listing is for a NEW DME 5980.

Precision shoulder bushing with 3.000″ ID and 5-7/8″ length.
Ideal for mold base alignment and industrial die sets.
Made from carburized CRS with hardened surface for durability.

See photos for details.

Part No: 5980
Type: Shoulder Bushing
Condition: NEW
Inside Diameter: 3.000″
Outside Diameter: 3.7505″
Length: 5.875″
Material: CRS (Carburized Steel)
Surface Hardness: 65–74 HRC
Please message us with any questions.

This listing is for a NEW MCGILL MCF 90S. It is designed for high-load linear motion in industrial automation systems. This unit is categorized as a cam follower bearing and includes the following capabilities: stud-type mounting, sealed needle roller design, and flat roller profile.

This listing is for a NEW Cooper Bussmann H4X-03RHD Handle. It is designed for use with heavy-duty disconnect switches and enclosures requiring NEMA 4/4X protection. This unit is categorized as a Handle Assembly and includes the following capabilities: NEMA 4/4X rated for harsh environments, red heavy-duty design for safety, and compatibility with Cooper Bussmann switchgear systems.

This listing is for a USED NORGREN B08-297A3MA. It is designed for regulating and filtering compressed air in pneumatic systems. This unit is categorized as a pneumatic filter regulator and includes the following capabilities: 250 PSI max pressure, integrated filter element, and compact body for inline installation.

This listing is for a Used REXNORD P3-U239N. It is designed as a standard-duty pillow block bearing for industrial shaft support applications. This unit is categorized as a Mounted Ball Bearing and includes the following capabilities: 2-7/16″ bore, cast iron housing, setscrew locking.

This listing is for a NEW HONDA ENGINEER 3908 ON/OFF Valve.

Industrial-grade ON/OFF valve designed for fluid or air control in Honda power systems or automation setups. Features rugged construction and reliable switching performance.

See photos for details.

Part No: 3908
Type: ON/OFF Valve
Condition: NEW
Manual or solenoid actuation
IP66-rated housing
Die-cast aluminum or stainless steel body
Please message us with any questions.

Brand new BIMBA BR-041-DB hydraulic and pneumatic cylinders available. Ideal for a variety of industrial applications, these high-quality cylinders are designed to deliver reliable performance. Perfect for enhancing your machinery efficiency.

LEYBOLD 71251410, used coupling insert in good condition. Ideal for ensuring reliable performance in your mechanical systems. Secure this essential component for your equipment needs today. Model 71251410, manufactured by LEYBOLD.

BTM 001439 clamp available for purchase. Manufactured by BTM, this used equipment is ideal for various applications. Don’t miss out on this reliable tool to enhance your workflow efficiency.

This listing is for a USED Aurora Air Products 11HB5C8D3K Pneumatic Cylinder.

Heavy-duty tie-rod style pneumatic cylinder from Aurora’s 11HB series. Features a 1-1/2″ bore and 8″ stroke with a stainless steel rod and aluminum body. Ideal for general-purpose industrial automation and motion control.

See photos for details.

Part No: 11HB5C8D3K
Type: Pneumatic Cylinder
Condition: USED
1-1/2″ Bore
8″ Stroke
Double-Acting, Tie-Rod Style
Stainless Steel Rod
Aluminum Body
Please message us with any questions.