This listing is for a USED SUN CKIBXCN.

Pilot-to-open hydraulic check valve from Sun Hydraulics, designed for high-pressure applications requiring load holding and hose break protection. Allows free flow from port 2 to port 1 and blocks reverse flow unless pilot pressure is applied at port 3.

See photos for details.

Part No: CKIBXCN
Type: Pilot-to-Open Hydraulic Check Valve
Condition: USED
Flow Capacity: 120 GPM
Cavity: T-19A
Pilot Ratio: 3:1
Cracking Pressure: 30 PSI
Max Pressure: 5000 PSI
Steel Seat, Non-Vented, Non-Sealed Pilot

Please message us with any questions.

This listing is for a NEW NTN UCFC212D1 Four-Bolt Round Flange Bearing Unit.

Heavy-duty flange bearing unit with cast iron housing and set screw locking. Designed for industrial applications requiring high load capacity and durability. Features nitrile rubber contact seals and relubrication capability.

See photos for details.

Part No: UCFC212D1
Type: Flange Bearing Unit
Condition: NEW
Shaft Diameter: 60 mm
Max Speed: 2500 RPM
Dynamic Load Rating: 52.5 kN
Static Load Rating: 36.0 kN
Seal Type: Nitrile Rubber Contact Seal
Housing Material: Cast Iron
Please message us with any questions.

This listing is for a NEW THK HSR25R1UU+220L. It is designed for precision linear motion in industrial automation and CNC systems. This unit is categorized as a linear guide block and rail assembly and includes the following capabilities: 25mm rail compatibility, high-rigidity block design, and smooth travel for repeatable positioning.

This listing is for a NEW TIMKEN RCJ1 1/4. It is designed for mounting on machinery frames to support rotating shafts. This unit is categorized as a flange-mount pillow block bearing and includes the following capabilities: 1-1/4″ bore, 4-bolt mounting, and cast iron housing for durability.

This listing is for a NEW NTN KRVT47LL.

Cam follower stud type track roller bearing with spherical outer diameter. Ideal for linear motion applications requiring high load capacity and durability.

See photos for details.

Part No: KRVT47LL
Type: Cam Follower
Condition: NEW
Roller Diameter: 47 mm
Roller Width: 25.5 mm
Stud Diameter: 20 mm
Stud Length: 40.5 mm
Material: Through Hardened Steel
Double Sealed
Slotted Head Drive
Please message us with any questions.

This listing is for a NEW DODGE 455599. It is designed for belt-driven power transmission systems using QD (Quick Detachable) bushings. This unit is categorized as a sheave and includes the following capabilities: 2-groove configuration, A10.6/B11.0 belt section compatibility, and SK bushing mount.

This listing is for a NEW SKF 22222 EK/C3. It is designed for high-load radial and axial support in rotating machinery. This unit is categorized as a spherical roller bearing and includes the following capabilities: 110mm bore diameter, 200mm outer diameter, and 53mm width.

This listing is for a New TIMKEN 415683. It is designed as a multi-lip nitrile oil seal for industrial and automotive shaft sealing applications. This unit is categorized as an Oil Seal and includes the following capabilities: 6″ shaft diameter, 7.007″ OD, dual lip with spring

This listing is for a NEW PTDA ANSI 100-2CP. It is designed for mechanical power transmission in industrial machinery. This unit is categorized as a Standard Duty Roller Chain and includes the following capabilities 10-foot length, 158 links, ANSI 100-2 double strand, carbon steel construction.

This listing is for a USED LAMINA G516325UG Guide Pin. It is designed for precision alignment in die sets and press tooling. This unit is categorized as a NAAMS Standard Guide Pin and includes the following capabilities: 63mm diameter, 250mm length, unground finish, and pressed fit design.

This listing is for a used Lamina G515022UG NAAMS guide pin.
It is an unground guide pin designed for die and tooling applications in compliance with NAAMS standards.

See photos for details.

Part No: G515022UG
Manufacturer: Lamina
Type: NAAMS Guide Pin (Unground)
Condition: USED
Size: 50mm x 225mm

This listing is for a NEW DODGE P2B-SC-115 Pillow Block Bearing Unit.
Heavy-duty 2-bolt pillow block bearing designed for industrial applications. Features a 1-15/16″ bore, set screw locking, and single lip contact seal. Cast iron housing with relubrication capability ensures long service life in demanding environments.
See photos for details.
Part No: P2B-SC-115
Type: Pillow Block Ball Bearing Unit
Condition: NEW
Bore Diameter: 1-15/16 in
Mounting Type: 2-Bolt Base
Locking Device: Set Screw
Seal Type: Single Lip Contact
Housing Material: Cast Iron
Relubricatable: Yes
Please message us with any questions.

This listing is for a NEW I-AUTOMATION LB63×72 Ultra-Thin Pneumatic Cylinder.

Compact pneumatic actuator designed for precision industrial automation tasks.

See photos for details.

Part No: LB63×72
Type: Ultra-Thin Pneumatic Cylinder
Condition: NEW
Bore Size: 63mm
Stroke Length: 72mm
Mounting: Compact / Thin Profile
Label Date: 2020-04-01

Please message us with any questions.

This listing is for a NEW JAKOB KM35.

Precision metal bellows coupling designed for high-torque, zero-backlash applications. Features stainless steel bellows and EASY-Clamping hubs for quick installation. Ideal for servo drives, CNC machinery, and automation systems.

See photos for details.

Part No: KM35
Type: Metal Bellows Coupling
Condition: NEW
Torque Rating: 35 Nm
Shaft Diameter Range: 10–32 mm
Torsional Stiffness: 5.8 Nm/arcmin
Axial Misalignment: ±0.25 mm
Lateral Misalignment: ±0.3 mm
Temperature Range: –40°C to +200°C
Please message us with any questions.

This listing is for a new Kartell 229 vacuum release valve assembly.
Designed for use with Kartell vacuum desiccators, this component allows controlled re-admittance of air to avoid disturbing contents.

See photos for details.

Part No: 229
Type: Vacuum Release Valve Assembly
Condition: NEW

Compatible with Kartell plastic vacuum desiccators
Includes specially grooved stopper for slow air re-entry
Helps maintain vacuum up to -740 mm Hg
Durable polypropylene/polycarbonate construction

This listing is for a USED TÜNKERS V 40 LWA00 T12 Pneumatic Clamp.

Industrial-grade pneumatic swing clamp used in automated welding and assembly applications. Delivers reliable holding force with a compact footprint, ideal for high-cycle manufacturing environments.

See photos for details.

Part No: V 40 LWA00 T12
Type: Pneumatic Swing Clamp
Condition: USED
Mounting: Flange/Base Mount
Clamp Motion: Swing (LWA00 configuration)
Arm Included: Yes (verify length/style)
Actuation: Pneumatic
Manufacturer: TÜNKERS Maschinenbau GmbH

Please message us with any questions.

SMC Hydraulic and Pneumatic Cylinders, model CDG1BN40-20+150-XC11. Reliable used condition, offering quality performance for various applications. Ideal for those seeking dependable SMC engineering.

Clippard MME-41PEEC Solenoid Valve in used condition. Ideal for applications needing reliable performance and efficient control. Explore precision engineering with this robust piece. Contact for further details and availability.

INA KWVE30-B Linear Bearings available, new in box. Precision-engineered for optimal performance and durability, these bearings suit varied applications, ensuring smooth motion and reliable support. Ideal for professionals in need of high-quality components.

PARKER HANNIFIN 40CN240W-TW used hydraulic filter assembly kit available. Reliable choice for maintaining hydraulic systems and ensuring optimal performance. Ideal for professionals seeking durable components.

EANOY B06F2-LB063A0072-BS-08 hydraulic and pneumatic cylinder in used condition. Ideal for enhancing industrial applications. Contact for details and pricing.

Enhance your system’s efficiency with the HYDAC Model 1250490 Hydraulic Filter & Assembly Kit. Brand-new, top-tier components designed for optimal performance in hydraulic applications. Suitable for various systems needing reliable filtration solutions.

FAG 6014 bearings, brand new; ideal for efficient performance in various applications. Trusted quality ensures durability and reliability. Get these essential components to enhance your machinery’s operation.

SKA model 46627 bearings, brand new condition, ready to enhance your equipment with precision and reliability. Ideal for various applications requiring high-quality performance. Limited stock available, contact for details.

CHATILLON DFG-50 Gauge, used, ready for your precision measurement needs. Reliable performance from a trusted manufacturer, ideal for various applications. Excellent choice for those seeking quality at an affordable price.

SCHNEEBERGER MRW 35 C G2-V2 roller monorail carriage available. Ideal for precision motion applications. Used condition, reliable manufacturer.

SCHNEEBERGER MRC 35-G1-V2 roller monorail carriage available in used condition. Ideal for precision applications, ensuring smooth and reliable operation. Quality engineering from a trusted manufacturer.

The Bray 3″ Butterfly Valve (PN: 300300-11010734 N1038) is a used industrial valve designed for precise flow control in fluid handling applications. Engineered for high-performance sealing and durability, this valve is ideal for HVAC, water treatment, chemical processing, and industrial fluid systems. With a compact, robust design and reliable shutoff capabilities, this butterfly valve ensures efficient operation and long service life in demanding environments.

This listing is for a Used ASCO T541519.

The ASCO T541519 is a multifunction spool valve from the 541 Series, designed for use in pneumatic automation systems. It features a 5/2 configuration and conforms to ISO 5599/1 standards, making it suitable for a wide range of industrial applications. The valve supports internal or external pilot supply and return, offering flexible installation options.

See photos for details.

Part No: T541519
Type: Solenoid Operated Spool Valve
Condition: Used
Valve Function: 5/2
Mounting: ISO 5599/1 Size 1 Subbase
Operation: Solenoid air-operated
Pilot Supply: Internal or external (configurable)
Return: Spring or air return (configurable)
Pressure Range: 0 to 12 bar
Media: Filtered, lubricated or non-lubricated air
Application: Pneumatic control systems, automation

Please message us with any questions.