This listing is for a NEW JTEKT CORPORATION 38-84210011-0.

Precision ground ball screw assembly designed for RL axis motion in CNC machine tools. Manufactured by JTEKT for high-accuracy linear positioning in industrial environments.

See photos for details.

Part No: 38-84210011-0
Type: RL Axis Ball Screw
Condition: NEW
Material: Hardened steel
Thread Diameter: ~36–40 mm
Thread Pitch: ~12–15 mm
Length: ~1000–1500 mm
Please message us with any questions.

This listing is for a NEW DMG MORI BS2047B01.

Precision ground Z-axis ball screw designed for DMG MORI NLX2500/700 CNC turning centers. Ideal for restoring high-accuracy vertical motion control in industrial machining environments.

See photos for details.

Part No: BS2047B01
Type: Z-Axis Ball Screw
Condition: NEW
Application: NLX2500/700 CNC Turning Center
Thread Diameter: ~40 mm
Thread Pitch: ~15 mm
Total Length: ~874 mm
Thread Length: ~743 mm
Material: Hardened steel
Please message us with any questions.

This listing is for a NEW MORI SEIKI BS2051.

Tailstock ball screw assembly designed for MORI SEIKI CNC lathes. Precision ground for accurate tailstock positioning and smooth linear motion. Ideal for service set replacements or upgrades.

See photos for details.

Part No: BS2051
Type: Tailstock Ball Screw
Condition: NEW
Application: MORI SEIKI CNC Lathe Tailstock
Material: Hardened steel
Thread Diameter: ~28–36 mm
Thread Pitch: ~10–12 mm
Length: ~800–1200 mm
Please message us with any questions.

This listing is for a USED ATLAS COPCO AX1-1.5. It is designed for ergonomic support and positioning of torque tools in industrial assembly environments. This unit is categorized as a torque arm and includes the following capabilities: inverted arm configuration, tool stabilization, and improved operator precision.

This listing is for a NEW BOSTON GEAR F718-5-B7-G. It is designed for torque reduction and speed control in industrial drive systems. This unit is categorized as a worm gear reducer and includes the following capabilities: 5:1 gear ratio, right-angle configuration, and 2.0 HP capacity.

This listing is for a NEW THK SHS55LR2SSE+1653L-II. It is designed for high-load linear motion in CNC and industrial automation systems. This unit is categorized as a linear guide rail and block set and includes the following capabilities: 1653mm rail length, SHS55 long block configuration, and sealed bearing design.

This listing is for a USED Tolomatic BC310SK14.000TS2 Rodless Band Cylinder.

Industrial-grade pneumatic actuator with a 14-inch stroke and recirculating ball bearing design. Ideal for applications requiring smooth linear motion in compact spaces. Features durable aluminum housing and stainless steel band for long service life.

See photos for details.

Part No: BC310SK14.000TS2
Type: Rodless Pneumatic Band Cylinder
Condition: USED
Bore Size: 1.5″
Stroke Length: 14.000″
Recirculating Ball Bearing Design
Max Pressure: 250 psi
Please message us with any questions.

This listing is for a USED FESTO DPA-100-16 Pneumatic Pressure Booster.

Designed to increase air pressure in pneumatic systems, this unit is ideal for industrial automation setups requiring higher output pressure from standard compressed air sources.

See photos for details.

Part No: DPA-100-16
Type: Pneumatic Pressure Booster
Condition: USED
Input Pressure: 2–10 bar (29–145 PSI)
Output Pressure: 4–16 bar (58–232 PSI)
G1/2″ Threaded Ports
Chassis Mount
Operating Temp: 5°C to 60°C

Please message us with any questions.

This listing is for a USED SUMITOMO CHHMS40-6215-B-29 GEAR REDUCER with TK-J MOTOR and ESB-250 MAGNETIC BRAKE.

High-performance Cyclo drive assembly with 3-phase induction motor and built-in brake for industrial automation and conveyor control. Ideal for precise start/stop operation in load-handling applications.

See photos for details.

Gearbox: CHHMS40-6215-B-29
Motor: SUMITOMO TK-J 3-Phase Induction Motor
Brake: ESB-250 Electromagnetic Brake
Condition: USED
Voltage: 3-Phase (200–230/460V typical)
Mounting: Foot or Flange
Application: Load Holding, Conveyors, Automation

Please message us with any questions.

ASCO NFHTB210B030 solenoid valve, used condition. Ideal for industrial and commercial applications. Optimize your operations with this reliable component at a competitive price.

The HEIDENHAIN LC491F 372850-09 Linear Guide is a new high-precision linear feedback component engineered for demanding CNC and automation environments. Known for its exceptional accuracy and durability, this linear guide is designed to provide reliable position feedback for linear axes, ensuring optimal performance in high-speed, high-precision applications. HEIDENHAIN’s LC series is a trusted solution in industries requiring exacting tolerances, making this unit an essential upgrade for modernizing or enhancing machine tools and automated systems.

New ROSEDALE LC04-6-3/4P-1-200-CBNPB Filter, condition: new. Optimize your system’s performance with this high-quality filter, ensuring efficiency and reliability. Ideal for various applications, designed to meet industrial demands.

This listing is for a NEW KOHARA SRFD4-1500.

Precision gear rack with bolt holes, ideal for linear motion systems and industrial automation. Made from high-strength carbon steel with black oxide coating for durability.

See photos for details.

Part No: SRFD4-1500
Type: Gear Rack
Condition: NEW
Module: 4
Number of Teeth: 120
Total Length: 1508 mm
Face Width: 40 mm
Height: 45 mm
Material: S45C Carbon Steel
Surface Treatment: Black oxide coating
Please message us with any questions.

This listing is for a USED PARKER Hydraulic Cylinder, likely Series 2H (tie‑rod industrial type).

Part No: 1H2H0A00124775
Type: Heavy-Duty Tie-Rod Hydraulic Cylinder
Condition: USED
Key Notes:
– Parker quality build — tie-rod structure for industrial applications
– Exact specs (bore, stroke, rod, mounting) not verified — see photos

This listing is for a NEW NSK NH450842BNC2W01P54.

Precision linear guide rail from NSK’s NH series, designed for high-load, high-speed applications. Features quiet operation, self-aligning capability, and long service life.

See photos for details.

Part No: NH450842BNC2W01P54
Type: Linear Guide Rail
Condition: NEW
Rail Width: 45 mm
Series: NH
Features: High load, quiet operation, self-aligning
Please message us with any questions.

This listing is for a NEW THK SRG45LR2SSCOE+1390LP-II.

Precision linear guide rail from THK’s SRG series, featuring caged ball technology for smooth motion and reduced noise. Includes stainless steel rail and carriages with end seals.

See photos for details.

Part No: SRG45LR2SSCOE+1390LP-II
Type: Linear Guide Rail
Condition: NEW
Rail Width: 45 mm
Length: 1390 mm
Carriages: 2 (LR2)
Material: Stainless Steel
Please message us with any questions.

This used Ralph W Earl Hydraulic Power Unit is a compact and reliable solution for delivering consistent hydraulic force in various industrial and automation systems. Equipped with a 2 HP 220V motor and a 10″ x 15″ x 9″ reservoir, this unit offers dependable performance in hydraulic or pneumatic applications. It also includes a RM-08-98540 300 OPSI heat exchanger, helping to maintain thermal stability during continuous operation.

This listing is for a NEW INA RUE35-E-H-W2-G2-V3/616.

Precision linear guide rail from INA’s RUE series, designed for X-axis motion control in CNC and automation systems. Features high preload, wide rail, and G2-grade accuracy.

See photos for details.

Part No: RUE35-E-H-W2-G2-V3/616
Type: Linear Guide Rail
Condition: NEW
Rail Width: 35 mm
Configuration: High preload, wide rail, G2 precision
Country of Origin: Germany
Please message us with any questions.

This listing is for a NEW PARKER 803-1044A. It is designed for precision linear motion in industrial automation systems. This unit is categorized as a rodless electromechanical linear actuator and includes the following capabilities: ball screw drive, integrated guide rail, and high thrust force.

This listing is for a NEW PARKER 803-1044A. It is designed for precision linear motion in industrial automation systems. This unit is categorized as a Rodless Electromechanical Linear Actuator and includes the following capabilities: Ball screw drive, integrated guide rail, and high thrust force.

This listing is for a New Hoffman CCS8WJCRLG. It is designed for mounting pendant arm systems to vertical surfaces in industrial enclosures. This unit is categorized as a Cable Wall Joint and includes the following capabilities: 180° swivel range, steel construction, and compatibility with Compact Series 4 System 80 arms.

This listing is for a NEW (Open Box) LOT OF 6 INA KRE62-PP-A.
Stud-type track rollers with crowned outer ring and axial guidance. Each unit features a sealed needle roller bearing, eccentric bushing, and hex socket. Ideal for cam drives and linear motion systems.
See photos for details.
Part No: KRE62-PP-A
Type: Stud Type Track Roller / Cam Follower
Condition: NEW (Open Box)
Roller Diameter: 62 mm
Roller Width: 29 mm
Stud Diameter: 24 mm
Thread Size: M24 x 1.5
Guidance: Axial
Relubricatable: Yes
Please message us with any questions.

This listing is for a NEW VERSA AGG-4232-CG-70-243-A120.

4-way solenoid valve from Versa’s A-Series. Features dual solenoid-pilot actuation, subplate mounting, and 120VAC operation. Ideal for low-pressure pneumatic applications.

See photos for details.

Part No: AGG-4232-CG-70-243-A120
Type: Pneumatic Directional Control Valve
Condition: NEW
Voltage: 120/60 VAC
Mounting: Subplate, internal pilot
Leads: 48″ red leads, wire leads
Body Size: 1/8″
Please message us with any questions.

This listing is for a NEW VERSA AGG-4232-CG-70-243-A120.

4-way solenoid valve from Versa’s A-Series. Features dual solenoid-pilot actuation, subplate mounting, and 120VAC operation. Ideal for low-pressure pneumatic applications.

See photos for details.

Part No: AGG-4232-CG-70-243-A120
Type: Pneumatic Directional Control Valve
Condition: NEW
Voltage: 120/60 VAC
Mounting: Subplate, internal pilot
Leads: 48″ red leads, wire leads
Body Size: 1/8″
Please message us with any questions.

This listing is for a USED INA RUE45‑E‑HL‑W2/1389.5/AAAC linear recirculating roller bearing and guideway assembly.

High‑long carriage RUE45‑E‑HL with two carriages mounted on ~1389.5 mm guideway, preload class V3, accuracy G2.

See photos for details.

Part No: RUE45‑E‑HL‑W2/1389.5/AAAC
Type: Linear roller guideway assembly
Condition: USED
Size: 45 (Internal dimension)
Carriage: HL (High‑Long)
Carriages per set: W2 (two)
Preload: V3 (standard)
Accuracy: G2
Guideway length: 1389.5 mm
Sealing: Standard elastic end‑wipers
Please message us with any questions.

FALK 600WOCM1A gearbox available in used condition. Efficiently designed for reliable performance. Ideal for industrial applications seeking quality components at a competitive price. Reach out for more details and availability.

Nederman FilterBox Air Filter System, New. Reliable air filtration from a trusted manufacturer. Enhance air quality with this top-tier, new condition model. Ideal for various applications demanding clean air solutions.

The YASKAWA MOTOMAN HW0390129-A Linear Bearing is a high-performance, industrial-grade component designed for precision motion applications. This used unit remains in excellent operational condition, ensuring smooth, reliable linear movement with minimal friction. Featuring 3930 mm Overall Length (OAL), this bearing is ideal for applications requiring long travel distances and heavy-duty load handling. Engineered with a SHS45R2SSE profile, it provides enhanced rigidity and durability, making it suitable for robotics, automation systems, and CNC machinery.

This listing is for a NEW ROSEMOUNT 2051CFPDS005A1S0260D32AA1Q4I6.

This is a Rosemount 2051CF Coplanar™ pressure transmitter, designed for differential pressure flow measurement. It integrates seamlessly with primary elements and manifolds, offering high accuracy and reliability in demanding industrial environments.

See photos for details.

Part No: 2051CFPDS005A1S0260D32AA1Q4I6
Type: Differential Pressure Flow Transmitter
Condition: NEW

Manufacturer: Emerson / Rosemount
Series: 2051CF Coplanar™
Output: 4–20 mA with HART® Protocol
Accuracy: Up to ±0.05% of span
Range: 0 to 5 psi differential (Span Code S005)
Process Connection: Coplanar flange
Material: 316 SST isolators, SST sensor module
Mounting: Traditional or manifold-ready
Certifications: SIL2/3, CSA, ATEX, IECEx (model dependent)
Application: Flow measurement in oil & gas, chemical, and industrial processes