This listing is for a USED INDUSTRIAL GAS SPRINGS 4-3.5-9.05-ME-PLE-30LBS-MS.

Industrial gas spring with 3.5″ stroke and 9.05″ extended length. Provides 30 lbs of force for controlled motion and support in machinery, enclosures, or equipment panels.

See photos for details.

Part No: 4-3.5-9.05-ME-PLE-30LBS-MS
Type: Gas Spring
Condition: USED
Stroke Length: 3.5 inches
Extended Length: 9.05 inches
Force: 30 lbs
Material: Mild Steel
End Fittings: PLE
Please message us with any questions.

This listing is for a NEW SIEMENS 6ES7 328-0AA00-7AA0. It is designed as a front door module for SIMATIC S7-300 PLC systems. This unit is categorized as a PLC accessory and includes the following capabilities: enclosure protection, module access support, and compatibility with Siemens automation platforms.

This listing is for a NEW PARKER PS801P. It is designed for use with the 07F filter series in compressed air systems. This unit is categorized as a 40-micron replacement filter element and includes the following capabilities: standard particulate filtration, EPDM construction, and compatibility with Prep-Air II series.

This listing is for a NEW FAFNIR 9110PP.
Single row deep groove ball bearing with 50 mm bore, 80 mm OD, and 16 mm width. Features double contact rubber seals and C3 internal clearance for high-speed applications. Ideal for electric motors, gearboxes, and industrial machinery.
See photos for details.
Part No: 9110PP
Type: Deep Groove Ball Bearing
Condition: NEW
Bore Diameter: 50 mm
Outside Diameter: 80 mm
Width: 16 mm
Seal Type: PP (Double Contact Rubber Seals)
Internal Clearance: C3
Max Speed: 4615 RPM
Please message us with any questions.

This listing is for a NEW MCGILL MCYR 17.
Metric yoke-type cam follower with 40 mm crowned roller and sealed needle roller bearing. Designed for high-load linear motion applications in industrial automation. Features LUBRI-DISC® seal and chrome steel construction.
See photos for details.
Part No: MCYR 17
Type: Metric Yoke-Type Cam Follower
Condition: NEW
Roller Diameter: 40 mm
Bore Diameter: 17 mm
Roller Width: 40 mm
Closure Type: Sealed
Bearing Element: Needle Rollers
Material: Chrome Steel
Please message us with any questions.

This listing is for a NEW TIMKEN SAS 3/4.
Pillow block ball bearing unit with 3/4″ bore and 2-bolt cast iron housing. Features a sealed ball bearing insert with set screw locking and narrow shroud seal. Ideal for medium-duty industrial applications.
See photos for details.
Part No: SAS 3/4
Type: Pillow Block Ball Bearing Unit
Condition: NEW
Bore Diameter: 3/4 in
Mounting Type: 2-Bolt Base
Housing Material: Cast Iron
Seal Type: Narrow Shroud
Locking Mechanism: Set Screw
Dynamic Load Rating: 3,200 lbf
Static Load Rating: 1,400 lbf
Please message us with any questions.

This listing is for a NEW MCGILL MCF 40 SBX.
Metric stud-type cam follower from the CAMROL® series. Features a flat roller profile, sealed needle roller bearing, and hex hole stud. Ideal for high-load, linear motion applications in industrial automation.
See photos for details.
Part No: MCF 40 SBX
Type: Metric Stud-Type Cam Follower
Condition: NEW
Roller Diameter: 40 mm
Roller Width: 20 mm
Stud Diameter: 18 mm
Bearing Element: Needle Rollers
Seal Type: LUBRI-DISC®
Please message us with any questions.

This listing is for a USED Marposs HXS20221215003 precision gauging block/system component.

Custom component likely used in Marposs modular gauging or process control systems. Designed for high-precision repeatability in measurement workflows—exact function or connectors not publicly documented; best for retrofit, rebuild, or part replacement.

Model: HXS20221215003
Brand: Marposs
Condition: USED / sold AS-IS
Please review photos carefully and confirm compatibility with your gauge/control system prior to bidding.

This listing is for a USED roll of 3M C1SNS3 Strip-N-Stick Silicone Foam Tape, measuring 3/8″ wide x 1/8″ thick x 10 yards long.

High-temperature closed-cell silicone foam with PSA adhesive backing – commonly used for gasketing, sealing, insulation, and vibration damping.

See photos for actual product label and condition.

Part No: C1SNS3
Type: Strip-N-Stick Silicone Foam Tape
Condition: USED / OPEN ROLL
Width: 3/8″
Thickness: 1/8″
Length: 10 yards
Please message us with any questions.

SPEARS 2729-005 used valve available now. Ideal for various applications, this reliable component from a trusted manufacturer comes ready to meet your industrial needs with durability and precision. Act quickly to secure this essential piece.

Discover the Tswu Kwan TK-610, your solution for premium filtration needs. This new filter model boasts top-notch quality, ensuring clean efficiency for various applications. Elevate your operational standards with Tswu Kwan’s reliable engineering.

New SKF 6012-2Z bearings available! High-quality, reliable bearings precision-engineered for optimal performance in diverse applications. Brand new condition; perfect for enhancing component efficiency and durability.

FESTO VSVA-B-M52-MZD-A1-1T1L valve available in used condition. Trusted FESTO quality, ideal for various applications. Compact and efficient, this valve is ready for your system requirements.

This listing is for a NEW DODGE F4B-SC-012.
Flange-mount ball bearing unit with 3/4″ bore and 4-bolt cast iron housing. Features set screw locking and single lip contact seal. Ideal for industrial power transmission applications.
See photos for details.
Part No: F4B-SC-012
Type: Flange-Mount Ball Bearing Unit
Condition: NEW
Bore Diameter: 3/4 in
Bolt Circle Diameter: 3.5 in
Bolt Spacing: 2.5 in
Housing Material: Cast Iron
Seal Type: Single Lip Contact
Relubricatable, Set Screw Locking
Please message us with any questions.

This listing is for a NEW TIMKEN 14123A. It is designed for use in high-load, low-speed applications requiring precise shaft alignment. This unit is categorized as a Tapered Roller Bearing Cone and includes the following capabilities: 1.25″ bore diameter, precision-machined steel, and compatible with TIMKEN 14276 cup.

This listing is for a NEW SIEMENS 6SL3262-1AA00-0BA0. It is designed as a shield connection kit for SINAMICS drive systems, specifically for FSA termination. This unit is categorized as a drive accessory and includes the following capabilities: grounding support, shield termination, and compatibility with SINAMICS S120 components.

This listing is for a New TIMKEN 415147. It is designed as a multi-lip nitrile oil seal for industrial and automotive shaft sealing applications. This unit is categorized as an Oil Seal and includes the following capabilities: 2.5″ shaft diameter, 3.505″ OD, spring-loaded dual lip design.

This listing is for a NEW TB WOODS 6E EPDM. It is designed for flexible shaft coupling in industrial power transmission systems. This unit is categorized as a Sure-Flex Plus Coupling Sleeve and includes the following capabilities: 6000 RPM max speed, 585 in-lb torque, and 4-way flexing action.

NACHI 6204 ZZEC3 radial ball bearing, new condition. Ideal for enhancing machinery performance. Built by trusted manufacturer NACHI, model 6204 ZZEC3, this bearing promises durability and precision. Perfect addition to your industrial equipment.

This listing is for a NIB Parker CB152HL001 cylinder body seal kit.
It is designed for sealing and maintenance of Parker hydraulic cylinders.

See photos for details.

Part No: CB152HL001
Manufacturer: Parker
Type: Cylinder Body Seal Kit
Condition: NEW

This listing is for a NEW MCGILL CF 1 3/4 SB.
Stud-type cam follower from the CAMROL series. Features a flat roller surface, sealed bearing design, and hex socket for easy installation. Ideal for high-load, linear motion applications.
See photos for details.
Part No: CF 1 3/4 SB
Type: Stud-Type Cam Follower
Condition: NEW
Roller Diameter: 1.7500 in
Roller Width: 1.0000 in
Stud Diameter: 0.7500 in
Thread: 3/4-16 UNC
Seal Type: LUBRI-DISC®
Relubricatable, Hex Hole
Please message us with any questions.

High-strength socket head cap screw designed for heavy-duty fastening in industrial and structural applications.

See photos for details.

Part No: 182059
Type: Socket Head Cap Screw
Condition: USED

Size: M42 × 180mm
Thread: Half-threaded
Grade: 12.9 alloy steel
Finish: Black oxide
High tensile strength and fatigue resistance
Ideal for machinery, automotive, and structural assemblies
Manufactured to ISO 4762 and ASME B18.3.1M standards

FESTO VSVA-B-B52-ZD-A1-1T1L valve available. Used condition. Perfect choice for various industrial applications. Contact us for more details.

BALLUFF BAM00F7 mounting clamp, brand new and ready to enhance your setup. Manufactured by BALLUFF, this high-quality component ensures reliable performance for various applications. Ideal for professionals seeking precision and durability.

This listing is for a NEW TIMKEN 14274. It is designed for use in high-load, high-speed applications requiring precise alignment and durability. This unit is categorized as a Tapered Roller Bearing Cup and includes the following capabilities: hardened steel construction, precision-ground raceway, and compatibility with TIMKEN 14125A cones.

This listing is for a NEW NTN 6305LLUC3/EM.
Single row deep groove ball bearing with 25 mm bore, 62 mm OD, and 17 mm width. Features double contact rubber seals and C3 internal clearance for high-speed applications. Ideal for electric motors, gearboxes, and industrial machinery.
See photos for details.
Part No: 6305LLUC3/EM
Type: Deep Groove Ball Bearing
Condition: NEW
Bore Diameter: 25 mm
Outside Diameter: 62 mm
Width: 17 mm
Seal Type: LLU (Double Contact Rubber Seals)
Internal Clearance: C3
Max Speed: 8100 RPM
Please message us with any questions.

THOMPSON A101824 Precision Ball Bushing Bearing, new open box. Ideal for various applications requiring high-performance bearings. Enhance your equipment with this premium product from a trusted manufacturer.

This listing is for a NEW NTN 6008ZZC3/EM & 6008ZZC3/L627.
Deep groove ball bearings with 40 mm bore and double metal shields. C3 clearance for high-speed applications. Suitable for electric motors, conveyors, and general industrial machinery.
See photos for details.
Part No: 6008ZZC3/EM, 6008ZZC3/L627
Type: Deep Groove Ball Bearings
Condition: NEW
Bore Diameter: 40 mm
Outer Diameter: 68 mm
Width: 15 mm
Shield Type: Double Shielded (ZZ)
Clearance: C3
Please message us with any questions.

This listing is for a NEW THK CF20UU-AB. It is designed for linear motion guidance in cam-driven automation systems. This unit is categorized as a Stud Type Cam Follower and includes the following capabilities 52mm outer diameter, 24mm width, M20x1.5 thread, sealed bearing with grease nipple.

This listing is for a Used DAYTON 4L290T V-Belt.

The 4L290T is a fractional horsepower (FHP) V-belt designed for light-duty power transmission applications. It is commonly used in HVAC systems, appliances, and small machinery. This belt features a durable rubber construction with polyester cord reinforcement for added strength and flexibility.

See photos for details.

Part No: 4L290T
Type: Fractional Horsepower V-Belt
Condition: Used
Outside Length: 29 inches
Top Width: 1/2 inch
Thickness: 5/16 inch (0.313 in)
Material: Gum Rubber with Polyester Cord
Temperature Range: -22°F to 194°F
Resistance: Heat, Oil, Static Conductive
Application: General Industrial, HVAC, Appliances
Belt Type: Closed Loop

Please message us with any questions.