This listing is for a NEW Allen Bradley 802M-BAJ9. It is designed for position detection and control in industrial automation systems. This unit is categorized as a limit switch and includes the following capabilities: sealed housing, mechanical actuator, and rugged design for harsh environments.

This listing is for a USED MCNAUGHTON-McKAY MCMCCP2-ETH-GF. It is designed as a convenience panel for industrial and commercial electrical setups. This unit is categorized as a power distribution accessory and includes the following capabilities: integrated Ethernet port, GFCI outlet, and compact faceplate configuration.

This listing is for a NEW LUMBERG AUTOMATION RST 8-RKT 8-727/5M. It is designed for sensor and actuator connectivity in industrial automation systems. This unit is categorized as a double-ended cordset and includes the following capabilities: 8-position M12 male to M12 female connectors, 5-meter cable length, and IP-rated construction for harsh environments.

This listing is for a NEW HIRSCHMANN BAT-CLB-2-N. It is designed as a low-loss RF cable assembly for industrial wireless applications. This unit is categorized as a coaxial cable and includes the following capabilities: 2-meter length, N male to N female connectors, 50 Ohm impedance, and IP65 environmental rating.

This listing is for a New Hirschmann BAT-CLB-2-N M-F. It is designed as a low-loss RF cable assembly with N male to N female connectors. This unit is categorized as a coaxial cable and includes the following capabilities: 2-meter length, 50 Ohm impedance, and IP65 rating.

This listing is for a New Allen Bradley 1494V-FS200. It is designed for high-current trailer disconnect applications using Class J fuses. This unit is categorized as a fuse block and includes the following capabilities: 200A rating, 600V max, 3-pole configuration.

This listing is for a New Cooper Bussmann FWP-350A. It is designed for semiconductor protection in high-speed circuits. This unit is categorized as a High Speed Fuse and includes the following capabilities: 350 Amp current rating, 700 VAC / 700 VDC voltage rating, stud-mount bolt-on design.

This listing is for a Used Giovenzana IP7007. It is designed as a safety foot switch for industrial machinery where hands-free operation is required. This unit is categorized as a Single Pedal Safety Foot Switch and includes the following capabilities: 1 Normally Open contact, IP65 water-resistant housing, yellow protective guard.

This listing is for a NEW SAMSUNG SND-6084N Network Dome Camera. It is designed for high-resolution surveillance in indoor and outdoor environments. This unit is categorized as a 2MP IP Dome Camera and includes the following capabilities: 1080p @ 60fps, motorized varifocal lens, WDR 120dB, and built-in SD card slot.

This listing is for a NEW HARDINGE DEX 7170901100 AIS Transmission Cable Adapter.

Used for interfacing AIS transmission systems in industrial applications.

See photos for details.

Part No: DEX 7170901100
Type: AIS Transmission Cable Adapter
Condition: NEW
Application: Cable interface for AIS systems

Please message us with any questions.

This listing is for a USED LOT OF 5 ABB 2CDS252001R0044.

These are ABB S202-C4 miniature circuit breakers, each rated for 2 poles, 4A, and 440V. Designed for DIN rail mounting, they feature C-curve tripping characteristics and comply with IEC and UL standards. Ideal for industrial and commercial electrical protection applications.

See photos for details.

Part No: 2CDS252001R0044
Type: Miniature Circuit Breaker
Condition: USED
Poles: 2
Rated Current: 4A
Voltage: 440V
Tripping Curve: C
Please message us with any questions.

This listing is for a USED OMRON D4SL-N4HFG-DN Guard Lock Safety Door Switch.

Solenoid-locking safety switch designed for machine guarding and interlock applications. Features a 24VDC solenoid, multiple NC safety contacts, and IP67 protection.

See photos for details.

Part No: D4SL-N4HFG-DN
Type: Guard Lock Safety Door Switch
Condition: USED
Solenoid Locking, 24VDC
3PST-NC + DPST-NC Contacts
1.5A (AC), 220mA (DC)
Holding Force: 1300 N
IP67 Rated
Please message us with any questions.

Discover precision with the Panasonic TH632 meter. Brand new and designed for accuracy, this equipment ensures top performance. Ideal for professionals seeking reliable, cutting-edge technology.

New NAIS TH632 Meter, ideal for precise measurements. Factory condition ensures top-tier performance in your operations. Top choice for professionals seeking reliability and accuracy in their equipment.

OMEGA 2845-031 thermostat for sale. Used condition, ideal for optimizing temperature control in various applications. Explore a reliable solution for your heating and cooling needs with this quality equipment from a trusted manufacturer.

This listing is for a USED LOT OF 6 BRAD HARRISON 1R5006A35M005 Sensor Cables.

These rugged industrial cables are designed for use in automation and sensor systems, providing reliable 5-meter M12 connectivity with durable jackets for harsh environments.

See photos for details.

Part No: 1R5006A35M005
Type: Sensor/Actuator Cable
Condition: USED
Length: 5 meters
Connector: M12 (Verify orientation/gender)
Jacket: Industrial-Grade PVC or PUR
IP67 Rated

Please message us with any questions.

This listing is for a USED nVent Hoffmann A1212CH 12″x12″x6″ Hinged Junction Box.

Features a steel, ANSI-61 gray powder-coated exterior, continuous hinge with screw-down clamps, and Type 12/NEMA 12 protection—ideal for industrial control panel or machine applications.

See photos for condition.

Part No: A1212CH
Type: Hinged Junction Box (12″x12″x6″)
Condition: USED
Key Specs:
– Steel, powder-coated ANSI-61 gray
– Continuous hinge, screw-down clamps
– Sealed to Type 12 / IP65
– UL/CSA compliant

Please message us with any questions.

Allen-Bradley 855E-BMM10C panel accessory available in used condition. Ideal for enhancing your panel setup. Durable and reliable, it’s a smart choice for upgrading or maintaining your system efficiently.

Moxa EDS-516A used buttons and switches for sale. Ideal for various applications. Reliable choice from trusted manufacturer. Compact design, easy integration. Perfect for your operational needs. Don’t miss this opportunity.

SCHOTT 20500.2/02, used condition. Ideal for professionals seeking reliable equipment. Don’t miss the chance to own this high-quality SCHOTT model. Secure your purchase today!

UNITED DETECTOR TECHNOLOGY OPTOMETER S370, used condition. Ideal for test, measurement, and inspection tasks. Model S370 ensures precise results in various applications.

MAHLE D-74613 Pressure Indicator, new condition. Ideal for precise pressure measurements, this reliable instrument is an excellent choice for professionals requiring high-quality equipment in their operations.

PILZ PNOZm1p PLC Module available. Manufactured by PILZ, this used PLC module is designed for reliable automation control tasks. Ideal for upgrading or maintaining existing systems with trusted engineering quality.

IAI RESU-2 internal regenerative resistor unit available. This connector from IAI, model RESU-2, is in used condition and ready for your application needs.

The Allen-Bradley 1494U-HM1 metal disconnect handle is a robust and reliable component designed for use with industrial power management systems. This brand-new handle is built to withstand demanding environments, offering smooth operation and durability. Its ergonomic design, high-quality materials, and compatibility with Allen-Bradley 1494U disconnect switches make it an essential choice for ensuring safety and efficiency in industrial applications.

This listing is for a USED Allen Bradley 802T-AP. It is designed as a limit switch for position sensing in industrial automation systems. This unit is categorized as a mechanical limit switch and includes the following capabilities: rugged construction, adjustable operating head, and compatibility with Allen Bradley 802T series components

This listing is for a NEW Allen Bradley 2090-CS0DSDS-AA03. It is designed for use with Kinetix servo drive systems. This unit is categorized as a servo drive cable and includes the following capabilities: standard non-flex design, DIN connector interface, and compatibility with MP-Series motors.

This listing is for a NEW SQUARE D 9422TCF30. It is designed for disconnecting power in industrial control systems. This unit is categorized as a safety disconnect switch and includes the following capabilities: 30A current rating, 600V voltage capacity, and 3-phase operation.

This listing is for a New Turck HKFMF 4824-3. It is designed as a 4-pin M40 Powerfast female receptacle with flange mount and bare flying leads. This unit is categorized as a panel-mount connector and includes the following capabilities: 600V AC rating, 35A current capacity, PROFIBUS PA compliant.

This listing is for a New Allen Bradley 1494V-RB4. It is designed for use with 1494V series disconnect switches to provide variable depth rod extension. This unit is categorized as a disconnect rod kit and includes the following capabilities: adjustable length from 9.5 to 23 inches, durable metal construction, and compatibility with rotary handle assemblies.