The ABB EJBBHAQZTZZZZZZ Busway End Tap Box is a brand new high-capacity power distribution unit from the Spectra Series, designed to deliver dependable and efficient power termination in commercial and industrial environments. Rated at 2500 amps, 600V, and configured for 3-phase, 3-ground (3PH, 3G) systems, this end tap box uses copper conductors for superior conductivity, reduced energy loss, and long-term durability. The EJBBHAQZTZZZZZZ is engineered to serve as a secure endpoint for ABB Spectra Series busway runs, offering a safe and modular connection point for downstream load distribution.

The ABB EJBBHFQZTZZZZFD Busway End Tap Box is a brand new high-amperage power distribution component from the Spectra Series, designed to terminate and connect to a 2500A copper busway system. Rated for 600V, this unit supports a 3-phase, 3-ground (3PH, 3G) configuration and features copper bus conductors for maximum electrical efficiency and thermal performance. As an end tap box, model EJBBHFQZTZZZZFD provides a secure, modular endpoint for power take-off, ideal for integration into large commercial and industrial electrical infrastructures.

The ABB EJBBHAQZRZZZZ Busway End Tap Box is a brand new high-capacity power distribution unit from the Spectra Series, designed for safe and efficient termination of busway runs in demanding industrial environments. With a 2500A amperage rating and support for 600V, 3-phase, 3-wire + ground (3WG) configurations, this INDR-rated (indoor-rated) unit is built with copper conductors for superior electrical conductivity and thermal performance. The EJBBHAQZRZZZZ is ideal for integrating into ABB Spectra Series systems where durability, high current handling, and ease of installation are critical.

The ABB EJBBHFGFACDZZFU Busway Phase Transposition Unit is a brand new high-capacity component from the Spectra Series, specifically engineered to manage phase alignment in large-scale electrical distribution systems. Rated at 2500A, 600V, and supporting a 3-phase, 3-ground (3PH, 3G) configuration, this SPSH (Spectra Series Plug-in/Feeder System Horizontal) unit features copper conductors for optimal conductivity and heat dissipation. The EJBBHFGFACDZZFU model performs a phase transposition, allowing installers to realign phase sequences without altering cabling—critical in complex or extended busway runs.

The Hewlett Packard HP 8594EM Spectrum Analyzer is a rugged, reliable solution for RF and EMC signal analysis. This used unit is designed specifically for EMI pre-compliance testing and general-purpose spectrum analysis across a broad frequency range. With its built-in diagnostic tools and measurement personalities, the HP 8594EM is a trusted choice for engineers in need of a cost-effective yet capable spectrum analysis instrument.

The ABB SACE EMAX E2 1600A Circuit Breaker is a used, high-capacity protection device engineered to deliver robust performance in industrial and commercial power distribution systems. Part of ABB’s trusted SACE EMAX series, the E2 model is designed for managing large electrical loads with precision, offering excellent reliability, advanced safety features, and flexible integration into new or existing installations. Ideal for users seeking dependable circuit protection without compromising on quality, the E2 1600A model ensures safe and efficient power management across a wide range of heavy-duty applications.

The ABB EJBBHADZECZDZZZ Busway Flat Offset (Right) is a brand new power distribution fitting from the Spectra Series, engineered for use in high-capacity busway systems requiring directional changes. Designed for indoor (INDR) applications, this unit supports 2500 amps, 600V, and a 3-phase, 3-ground (3PH, 3G) configuration. With copper bus conductors for superior conductivity and heat resistance, the EJBBHADZECZDZZZ model provides a flat offset to the right, making it ideal for routing around obstacles or adapting to structural layouts in commercial and industrial facilities.

The ABB EJBBHADZBCZDZZZ Busway Flat Offset (Down) is a brand new component from the Spectra Series, designed to provide a directional transition in a high-capacity electrical busway system. Rated for 2500A, 600V, and supporting a 3-phase, 3-ground (3PH, 3G) configuration, this indoor-rated unit features copper conductors and a flat offset (downward) orientation. The model is engineered to maintain optimal power flow while changing elevation in the busway layout, making it ideal for facilities with complex infrastructure and limited space.

Explore unparalleled performance with the ABB SACE E3S-A 25 circuit breaker. Brand new, expertly crafted for reliable electrical management. Ideal for modern power solutions demanding efficiency and robustness.

This listing is for a USED MGM AD370-Q0730. It is designed for three-phase voltage conversion in industrial power distribution systems. This unit is categorized as a dry-type power transformer and includes the following capabilities: 225 kVa rating, 480V primary input, and 400Y/231V secondary output.

MGM AD370-Q0730 480V 225KVA used transformer. General purpose, ideal for various applications.

The Challenger 330 KVA Isolation Transformer Model 333-LP3T is a used high-capacity transformer designed for industrial power distribution and electrical isolation applications. Engineered for efficient voltage regulation and electrical noise reduction, this isolation transformer enhances safety, performance, and equipment longevity in manufacturing, data centers, power distribution systems, and commercial facilities.

The ABB 2500A Spectra Series Copper Center Tap Box INDR is a new heavy-duty electrical distribution component designed for integration into 600V, 3-phase power systems. Engineered for high-current industrial applications, this center tap box utilizes high-conductivity copper bus bars and is part of ABB’s trusted Spectra Series. Ideal for indoor environments (INDR), this unit facilitates secure center-tap connections while ensuring efficient and reliable current distribution for large-scale commercial and industrial infrastructures.

This listing is for a NEW PENTAIR G521246G050. It is designed for enclosure cooling in industrial control systems. This unit is categorized as an enclosure air conditioner and includes the following capabilities: 12000 BTU cooling capacity, 460V AC input, 3-phase operation, and side-mount configuration.

This listing is for a USED POWERTRAN 3PTN43-75K-E2 Dry-Type Transformer. It is designed for stepping down or isolating electrical power in industrial applications. This unit is categorized as a Dry-Type Transformer and includes the following capabilities: 75 kVA power rating, primary voltage 480V (Delta), secondary voltage 240/120V LT (Wye), 3-phase, 60 Hz.

The Marelco Power Systems M-7710E / CSA-008776-01 is a used, industrial-grade dry-type transformer designed to deliver reliable voltage transformation in demanding electrical systems. With a 20 kVA capacity and a 230V configuration, this transformer is ideal for stepping down or isolating voltage for equipment, panels, or process control systems. Its robust build and CSA certification ensure dependable performance in both commercial and industrial environments.

The REX Power Magnetics RC225J-H is a used, high-capacity general-purpose transformer engineered to step down voltage from 600V to 480V in industrial and commercial power distribution systems. With a robust 225 kVA rating, this dry-type transformer is ideal for supporting large equipment loads, facility-wide voltage conversion, or balancing three-phase power systems. Built to North American standards, it delivers efficient, safe, and continuous operation in a wide range of applications.

Used EATON MDC0010480 A12 Busway available. Ideal for distributing power in industrial and commercial settings. Carefully selected for reliability and quality in power management solutions.

The Eaton Pow-R-Way III MDC0010480 B19 is a brand new, 10-foot straight-length copper busway section rated at 2500A. Designed for high-capacity power distribution, this busway segment supports 480V, 3-phase, 3-ground configurations, making it ideal for mission-critical environments and large industrial facilities. Built with high-conductivity copper conductors and Eaton’s robust Pow-R-Way III housing system, this unit offers long-term performance with reduced voltage drop and simplified installation.

The EATON 2500A POW-R-WAY III 10′ Copper Straight Length Busway is a new, high-capacity power distribution component engineered for efficient and reliable transmission of electrical power in commercial and industrial environments. Rated at 2500 amps and designed for 480V, 3-phase, 3-ground applications, this straight-length copper busway is part of Eaton’s robust POW-R-WAY III series, known for its durability, modularity, and easy installation. The 10-foot segment supports scalable configurations in high-demand electrical distribution systems.

This brand-new EATON Pow-R-Way III 2500A busway straight length features 10 feet of copper conductor designed for 480V, 3-phase, 3-ground power distribution. Engineered for heavy-duty industrial and commercial environments, the Pow-R-Way III series provides high-capacity, modular, and efficient power delivery systems. This 2500 amp copper unit ensures minimal voltage drop, excellent thermal performance, and ease of installation across vertical or horizontal runs.

The EATON 2500A POW-R-WAY III 10′ Copper Straight Length Busway is a brand-new power distribution solution engineered for high-capacity, three-phase electrical systems. Rated at 2500 amps and designed for 480V systems, this 10-foot copper straight-length busway section delivers exceptional electrical conductivity and thermal performance. Part of Eaton’s advanced Pow-R-Way III series, this busway supports demanding commercial and industrial applications where robust, scalable power delivery is critical. Its compact design and high-performance copper conductors ensure efficient power distribution while minimizing energy losses.

The ABB 2500A Spectra Series 10′ Straight Length Copper Busway is a new, high-capacity electrical distribution solution designed for commercial and industrial power systems. Rated for 2,500 amps, this Spectra Series busway delivers reliable, energy-efficient performance in demanding environments. The 10-foot straight copper busway section is UL-listed and built to handle 600V, 3-phase, 3-ground (3PH, 3G) configurations, offering superior conductivity and thermal performance. Ideal for facilities requiring scalable, flexible power delivery with minimal voltage drop.

The ABB 2500A Spectra Series 10′ Straight Length Copper Busway (Model SPSH) is a new high-capacity electrical distribution solution engineered for demanding commercial and industrial power systems. Rated at 600V and designed with 4 conductors plus ground (4G), this copper busway section ensures superior electrical performance, minimal power loss, and safe, reliable operation. As part of ABB’s trusted Spectra Series, the SPSH busway is ideal for installations requiring efficient power delivery with minimal space requirements.

The Square D 45T3HBISCUNLP-IZ is a used, high-quality 45 kVA dry-type transformer in good condition, ideal for stepping down voltage in commercial and industrial power systems. This transformer features a copper-wound core, reliable SO-type dry design, and a 3-phase, 60 Hz configuration. Built to Square D’s high standards, it provides safe and efficient operation in various electrical distribution applications. With a NEMA 1 ventilated enclosure and a weight of 670 lbs, it is well-suited for floor-mounted indoor installations.

The Eaton 2500A Pow-R-Way III Copper Expansion Joint is a new high-capacity component engineered for integration into 480V, 3-phase, 3-ground (3PH, 3G) electrical busway systems. Designed as part of the Pow-R-Way III series, this copper expansion joint plays a critical role in maintaining reliable connectivity between busway segments by accommodating thermal expansion, structural shifts, and dynamic mechanical loads. Crafted from high-conductivity copper and rated for continuous high-current operation, this expansion joint is ideal for demanding industrial and commercial power distribution environments.

This listing is for a NEW SIEMENS HPX3T160. It is designed for high-capacity industrial power distribution systems. This unit is categorized as a molded case circuit breaker and includes the following capabilities: 1600A current rating, 3-pole configuration, and 480V operation with 65kA interrupt rating.

ACE KISS-102 soldering equipment, 2006 model, in used condition. Perfect for a variety of soldering tasks. Ideal for professionals seeking reliable performance.

This listing is for a USED SolaHD Emerson ES5H37S. It is designed as a single-phase dry-type distribution transformer for industrial power applications. This unit is categorized as a power transformer and includes the following capabilities: 37.5 kVA rating, primary voltage 240 x 480V, secondary voltage 120/240V, and 60Hz frequency operation.

The General Electric 9T83B5574 Transformer is a new 75 kVA dry-type unit designed to step down 480V primary voltage to a 230V secondary output in industrial and commercial power distribution systems. Built with GE’s proven reliability and quality, this transformer is ideal for applications requiring efficient energy conversion and dependable performance. The 9T83B5574 features a ventilated enclosure, robust copper windings, and a low-maintenance design, making it suitable for continuous operation in a wide range of environments.