OMEGA NB8-CASS-14U-62 Thermostat, used, available for purchase. Ideal for those looking to acquire reliable equipment from a trusted manufacturer.

This listing is for a NEW BINAR 10211-2 Quick-Lift Cable Assembly.

Designed for use with BINAR Quick-Lift ergonomic lifting systems, this cable assembly supports signal and power transmission for control handle operation. Ideal for replacements or system expansions.

See photos for details.

Part No: 10211-2
Type: Quick-Lift Cable Assembly
Condition: NEW
Compatible with BINAR QLR and QLD systems
Quick-connect ends
Industrial-grade insulation
Please message us with any questions.

This listing is for a New Square D MG24449. It is designed for supplementary protection of branch circuits and control systems. This unit is categorized as a C60N series miniature circuit breaker and includes the following capabilities: 10A current rating, 2 poles, and 480Y/277VAC voltage support.

This listing is for a NEW HONEYWELL 060-G790-01 Pressure Transducer.

This high-accuracy pressure sensor from Honeywell’s Sensotec line is designed for industrial and automation applications. It features a 0–1000 PSI range and is ideal for hydraulic, pneumatic, and process control systems.

See photos for details.

Part No: 060-G790-01
Type: Pressure Transducer
Condition: NEW
0–1000 PSI range
Voltage output (exact range varies)
1/4″ NPT pressure port
Rugged industrial housing
Please message us with any questions.

This listing is for a USED HONEYWELL 060-M613-01 Pressure Sensor.

This industrial-grade sensor from Honeywell’s DS series is designed for accurate pressure monitoring in demanding environments. It supports up to 500 PSI and is ideal for automation, hydraulic, and pneumatic systems.

See photos for details.

Part No: 060-M613-01
Type: Pressure Sensor
Condition: USED
500 PSI range
Rugged industrial housing
Likely analog output (voltage or current)
1/4″ NPT pressure port
Please message us with any questions.

This listing is for a USED FANUC A81L-0001-0186 line reactor / general-purpose transformer.

Suitable for power conditioning and isolation in FANUC CNC controls, servo drive systems, and factory automation. Solid-state build, ideal for integration with Fanuc systems where voltage regulation and surge protection are required.

See photos for details.

Part No: A81L-0001-0186
Type: Line Reactor / Transformer
Condition: USED
• General-purpose transformer for FANUC equipment
• Approx. 8″ × 8″ × 8″, ~18 lb
• Industrial-grade build—consult unit manual for specific ratings

Please message us with any questions.

DART MD3P-3A Sensors and Switches for sale. Condition: used. Ideal for professionals seeking reliable performance at a competitive price. Get quality components from a trusted manufacturer. Limited stock available.

PHOENIX CONTACT FL SWITCH SFN 16TX, a new, high-quality network router, is now available. Ideal for ensuring seamless network connectivity in your professional setting. Enhance your infrastructure with cutting-edge technology and reliable performance.

STACO ENERGY 3PN1010 Transformer, new condition, ready for your industrial needs. This high-quality transformer offers reliable performance for various applications. Ideal for enhancing your energy system’s efficiency. Contact us for more details.

This listing is for a Used ISMET MTDN-S60 Transformer.

The MTDN-S60 is a single-phase safety isolation transformer designed for use in medical environments such as hospitals, clinics, and laboratories. It complies with stringent standards for medical-grade power supply, ensuring safe and reliable voltage isolation for sensitive equipment. These transformers are built to meet DIN EN 61558 and VDE 0100-710 standards for medical electrical systems.

See photos for details.

Part No: MTDN-S60
Type: Medical Isolation Transformer
Condition: Used
Primary Voltage: 230 V
Secondary Voltage: 0–28 V
Power Rating: Approx. 60 VA
Frequency: 50/60 Hz
Standards: DIN EN 61558, VDE 0570, VDE 0100-710
Applications: Medical Devices, Operating Rooms, Diagnostic Equipment
Mounting: Panel or Chassis
Construction: Impregnated Windings, Insulated Mounting Brackets
Temperature Class: ta 40°C

Please message us with any questions.

This listing is for a NEW Allen-Bradley 800T-FXP16AA1. It is designed as a 2-position push-pull pushbutton operator with transformer and amber cap for industrial control panels. This unit is categorized as a control station component and includes the following capabilities: 120V transformer, rugged construction, and compatibility with Allen-Bradley 800T series mounting hardware.

This listing is for a NEW Cooper Bussmann RD40-3-508 Switch. It is designed for manual disconnect and circuit isolation in industrial electrical systems. This unit is categorized as a rotary disconnect switch and includes the following capabilities: rated for 40A, 600V AC, UL508 compliance, and durable construction for industrial environments.

This listing is for a NEW RITTAL EB 1556.500. It is designed for housing electrical components in industrial and commercial environments. This unit is categorized as a wall-mount enclosure and includes the following capabilities: steel construction, IP66 protection rating, and hinged door access.

This listing is for a NEW Allen Bradley 100S-C30EJ14C. It is designed for use as a safety contactor in industrial control systems. This unit is categorized as a motor contactor and includes the following capabilities: 30A current rating, 24V DC coil voltage, and integrated safety features for machine protection.

Hubbell HBL2430SW used cables available. Professionally designed by a renowned manufacturer, these cables are ideal for enhancing your equipment setup. Perfect for those seeking quality and reliability from a trusted brand.

This listing is for a NEW RITTAL SV 9343.100. It is designed for use with NH fuse-switch disconnectors, size 1, in RiLine busbar systems. This unit is categorized as an interface module and includes the following capabilities: compact enclosure mounting, compatibility with NH size 1 fuse-switches, and integration into Rittal RiLine power distribution systems.

This listing is for a Used Allen Bradley 512-M/A25981. It is designed for motor control and protection in industrial environments. This unit is categorized as a combination motor starter and includes the following capabilities: integrated disconnect, magnetic starter, and enclosure-ready design

This listing is for a Used Allen Bradley Bulletin 512 Combination Controller with Control Transformer. It is designed for motor control and protection in industrial environments. This unit is categorized as a combination motor starter and includes the following capabilities: integrated disconnect, magnetic starter, and control transformer for low voltage control.

This listing is for a New ABB OPMP-01. It is designed for remote keypad mounting on ABB ACS310, ACS355, and ACS550 drives. This unit is categorized as a Drive Accessory and includes the following capabilities: UL Type 12 integrity, 10ft Cat5 cable, mounting hardware.

This listing is for a Used SQUARE D HU361AWKEI2. It is designed for safely disconnecting electrical circuits in industrial environments. This unit is categorized as a heavy-duty safety switch and includes the following capabilities: 30A rating, 600V max voltage, and NEMA enclosure compatibility.

This listing is for a USED SolaHD E750 Industrial Control Transformer.
Heavy-duty encapsulated control transformer designed for industrial environments. Features epoxy-sealed copper windings, molded terminal barriers, and bracket mounting for reliable operation in harsh conditions.
See photos for details.
Part No: E750
Type: Industrial Control Transformer
Condition: USED
Power Rating: 0.75 KVA
Primary Voltage: 240/480 VAC
Secondary Voltage: 120 VAC
Frequency: 50/60 Hz
Mounting: Panel / Bracket
Please message us with any questions.

This listing is for a USED EATON C0525E5WFBXXES.

Industrial control transformer rated at 525 VA with dual secondary outputs. Features epoxy encapsulated construction, molded-in terminals, and factory-installed fuse block. Ideal for automation panels and control systems.

See photos for details.

Part No: C0525E5WFBXXES
Type: Industrial Control Transformer
Condition: USED
Primary Voltage: 400/480 VAC
Secondary Voltage: 120V @ 500 VA, 24V @ 25 VA
Total VA Rating: 525 VA
Factory-mounted fuse block
Please message us with any questions.

This listing is for a USED Dongan 85-1045SH.

Single-phase general purpose transformer rated at 2.0 kVA. Ideal for industrial and commercial power distribution applications. Converts 240/480V input to 120/240V output.

See photos for details.

Part No: 85-1045SH
Type: General Purpose Transformer
Condition: USED
Power Rating: 2.0 kVA
Primary Voltage: 240/480 V
Secondary Voltage: 120/240 V
Phase: Single
Frequency: 60 Hz
Please message us with any questions.

This listing is for a NEW KEYENCE GL-RPT10PM-T Light Curtain Cable.

This 10-meter transmitter-side cable is designed for use with KEYENCE GL-R Series safety light curtains. It features a molded 5-pin M12 connector and IP67 protection when properly installed.

See photos for details.

Part No: GL-RPT10PM-T
Type: Light Curtain Cable – Transmitter
Condition: NEW
10-meter length
M12 5-pin straight connector
IP67 rated (when mated)
Compatible with GL-R Series
Please message us with any questions.

This listing is for a USED FANUC A05B-1405-B132 SENSOR UNIT.

Factory sensor commonly used in FANUC robotic systems and CNC machinery. Ideal for position detection, proximity sensing, or limit switch applications depending on machine configuration.

See photos for details.

Part No: A05B-1405-B132
Type: Sensor Unit
Condition: USED
Voltage: 24V DC (typical)
Connector: FANUC-compatible
Mounting: Bolt-on or bracket-integrated
Used in FANUC Robotic and CNC Systems

Please message us with any questions.

This listing is for a NEW LOT OF 6 BALLUFF BCC05T9 Cables.

These are industrial-grade sensor/actuator extension cables featuring straight M12 female 4-pin connectors with a durable PUR jacket. Designed for reliable use in harsh environments and automation systems.

See photos for details.

Part No: BCC05T9
Type: Sensor/Actuator Cable
Condition: NEW
Connector: M12 Female, 4-Pin, Straight
Jacket: PUR, Industrial-Grade
Voltage: 250V
Current: 4A
IP67/IP68 Rated
Please message us with any questions.

SIEMENS 6FX8002-2DC10-1BA0 cables available, brand new condition. Ideal for your electrical needs, featuring reliable SIEMENS quality and engineering. Enhance your setup with these advanced cables today.

SIEMENS Model 6FX8002-2DC30 cables, new condition, ideal for your high-performance needs. Enhance your operations with these quality cables designed for reliability and efficiency.

SIEMENS Cables, Model 6FX8002-2CH00-1ABO, now available in new condition. Perfect for your needs, offering reliability and superior performance. Enhance your equipment setup with our high-quality product from a trusted manufacturer.

FUJI ELECTRIC BW3232AAG Circuit Breakers now available in new condition. Durable, reliable equipment designed for electrical safety and efficiency. Ideal for industrial applications. Secure your high-quality breaker today.