This listing is for a USED DELTA POWER D4 K2. It is designed for hydraulic fluid transfer in mobile and industrial systems. This unit is categorized as a Bi-Directional Gear Pump and includes the following capabilities: 0.197 in³/rev displacement, 4000 RPM max speed, and 3/8″ NPTF rear ports

This listing is for a Used WESTAMP MT 4312 Servo Motor. It is designed for precision motion control in industrial automation systems. This unit is categorized as a Servo Motor and includes the following capabilities: 180V max voltage, 53 LB/IN continuous torque, and tachometer output of 7.0V per 1000 RPM.

This listing is for a Used IDC TM94IA Rev. C Control Board. It is designed for industrial automation systems requiring reliable PLC processing. This unit is categorized as a PLC Processor Board and includes the following capabilities: Rev. C firmware, fanless design, and standard IDC compatibility.

This listing is for a NEW Osborn HPC-7611 Load Runners Cam Follower Bearing (Part No. 91293).

Osborn Load Runners are heavy-duty cam followers designed for use in conveyor systems, linear motion applications, and heavy-duty tooling setups. The sealed design provides long service life and reliability.

See photos for details.

Part No: HPC-7611 / 91293
Type: Load Runners Cam Follower Bearing
Condition: NEW
Assembled in U.S.A.

Please message us with any questions.

This listing is for a USED SolaHD E750 Industrial Control Transformer.
Heavy-duty encapsulated control transformer designed for industrial environments. Features epoxy-sealed copper windings, molded terminal barriers, and bracket mounting for reliable operation in harsh conditions.
See photos for details.
Part No: E750
Type: Industrial Control Transformer
Condition: USED
Power Rating: 0.75 KVA
Primary Voltage: 240/480 VAC
Secondary Voltage: 120 VAC
Frequency: 50/60 Hz
Mounting: Panel / Bracket
Please message us with any questions.

This listing is for a USED EATON C0525E5WFBXXES.

Industrial control transformer rated at 525 VA with dual secondary outputs. Features epoxy encapsulated construction, molded-in terminals, and factory-installed fuse block. Ideal for automation panels and control systems.

See photos for details.

Part No: C0525E5WFBXXES
Type: Industrial Control Transformer
Condition: USED
Primary Voltage: 400/480 VAC
Secondary Voltage: 120V @ 500 VA, 24V @ 25 VA
Total VA Rating: 525 VA
Factory-mounted fuse block
Please message us with any questions.

This listing is for a USED LAPP 21700126.

Industrial-grade managed Ethernet switch with 8 RJ45 ports, designed for harsh environments and automation networks. Features include VLAN, QoS, redundancy, and wide temperature tolerance. Ideal for smart factory and control cabinet applications.

See photos for details.

Part No: 21700126
Type: Managed Ethernet Switch
Condition: USED
8 × RJ45 Ports (10/100BASE-T(X))
Voltage: 18–60 V DC
DIN Rail Mount
IP40 Protection
Operating Temp: -40°C to +75°C
Please message us with any questions.

This listing is for a USED LAPP 21700126 Ethernet Switch.

This is an ETHERLINE M08T-2GEN managed Ethernet switch designed for industrial automation networks. It features 8 RJ45 ports, VLAN and QoS support, and operates in extreme temperatures. DIN rail mountable and powered by 18–60 VDC.

See photos for details.

Part No: 21700126
Type: Managed Ethernet Switch
Condition: USED
Ports: 8 × RJ45 (10/100BASE-T(X))
Voltage: 18–60 VDC
Mounting: DIN rail
Protection Rating: IP40
Please message us with any questions.

This listing is for a USED CHROMA A806110 Electronic Test Module.

This component is part of Chroma’s automated test equipment systems and may serve as a module or accessory for power or safety testing. RoHS compliant and factory packaged.

See photos for details.

Part No: 9-80611099
Model: A806110
Type: Electronic Test Module
Condition: USED
RoHS Compliant
Please message us with any questions.

This listing is for a USED LAPP 21700126.

Managed Ethernet switch designed for industrial automation networks. Offers 8 RJ45 ports with support for VLAN, QoS, and redundancy. Operates in extreme temperatures and mounts easily to DIN rails.

See photos for details.

Part No: 21700126
Type: Managed Ethernet Switch
Condition: USED
Ports: 8 × RJ45 (10/100BASE-T(X))
Voltage: 18–60 V DC
Mounting: DIN Rail
Protection Rating: IP40
Operating Temp: -40 °C to +75 °C
Please message us with any questions.

This listing is for a USED Dongan 85-1045SH.

Single-phase general purpose transformer rated at 2.0 kVA. Ideal for industrial and commercial power distribution applications. Converts 240/480V input to 120/240V output.

See photos for details.

Part No: 85-1045SH
Type: General Purpose Transformer
Condition: USED
Power Rating: 2.0 kVA
Primary Voltage: 240/480 V
Secondary Voltage: 120/240 V
Phase: Single
Frequency: 60 Hz
Please message us with any questions.

This listing is for a USED LAPP 21700126.

This is an ETHERLINE M08T-2GEN managed Ethernet switch with 8 RJ45 ports, designed for industrial automation networks. It supports VLAN, QoS, and redundancy features, and operates in extreme temperatures from -40 °C to +75 °C. DIN rail mountable and powered by 18–60 V DC.

See photos for details.

Part No: 21700126
Type: Managed Ethernet Switch
Condition: USED
Ports: 8 × RJ45 (10/100BASE-T(X))
Voltage: 18–60 V DC
Mounting: DIN rail
Protection: IP40
Operating Temp: -40 °C to +75 °C
Please message us with any questions.

This listing is for a USED LAPP 21700126.

Industrial-grade managed Ethernet switch with 8 RJ45 ports, designed for harsh environments and automation networks. Features include VLAN, QoS, redundancy, and wide temperature tolerance.

See photos for details.

Part No: 21700126
Type: Managed Ethernet Switch
Condition: USED
Ports: 8 × RJ45 (10/100BASE-T(X))
Voltage: 18–60 V DC (nominal 48 V)
Mounting: DIN rail
Protection: IP40
Operating Temp: -40 °C to +75 °C

Please message us with any questions.

This listing is for a NEW KEYENCE GL-RPT10PM-T Light Curtain Cable.

This 10-meter transmitter-side cable is designed for use with KEYENCE GL-R Series safety light curtains. It features a molded 5-pin M12 connector and IP67 protection when properly installed.

See photos for details.

Part No: GL-RPT10PM-T
Type: Light Curtain Cable – Transmitter
Condition: NEW
10-meter length
M12 5-pin straight connector
IP67 rated (when mated)
Compatible with GL-R Series
Please message us with any questions.

This listing is for a USED PARKER 1TK40E9.8N465-X Double Acting Pneumatic Cylinder.

This high-performance cylinder features a 40 mm bore and 465 mm stroke, ideal for industrial automation, robotics, and precision actuation. Designed for up to 0.96 MPa operating pressure, it delivers smooth and reliable motion in demanding environments.

See photos for details.

Part No: 1TK40E9.8N465-X
Type: Double Acting Pneumatic Cylinder
Condition: USED
Bore Size: 40 mm
Stroke Length: 465 mm
Operating Pressure: Up to 0.96 MPa
Material: Aluminum body
Please message us with any questions.

This listing is for a USED ATI DU3M.

This is a DeviceNet Master Module for ATI robotic tool changers. It supports advanced communication and control features including arc prevention, air supply monitoring, and RFID-based safety switch integration. Ideal for high-performance robotic automation systems.

See photos for details.

Part No: DU3M
Type: DeviceNet Master Module
Condition: USED
Interface: (2) Mini connectors for DeviceNet and auxiliary power
Weight: 2.32 lbs (1.05 kg)
Operating Temp: -20 °F to 150 °F
Features: Arc prevention, NPN sensor inputs, Tool-ID, RFID safety switch support
Please message us with any questions.

IMACS Drive Model 05810-3-2 in used condition, perfect for those needing reliable performance from a trusted manufacturer. Act quickly to secure this quality piece for your setup today.

This listing is for a USED FANUC A05B-1405-B132 SENSOR UNIT.

Factory sensor commonly used in FANUC robotic systems and CNC machinery. Ideal for position detection, proximity sensing, or limit switch applications depending on machine configuration.

See photos for details.

Part No: A05B-1405-B132
Type: Sensor Unit
Condition: USED
Voltage: 24V DC (typical)
Connector: FANUC-compatible
Mounting: Bolt-on or bracket-integrated
Used in FANUC Robotic and CNC Systems

Please message us with any questions.

This listing is for a USED EDRIVE VT310 LINEAR ACTUATOR.

High-precision industrial linear actuator designed for automated positioning, lifting, or motion control. Features a rigid aluminum body and is compatible with servo or stepper motor mounting.

See photos for details.

Part No: VT310
Type: Electric Linear Actuator
Condition: USED
High-Thrust Capability
Ball or Lead Screw Drive
Compatible with Servo / Stepper Motors
Precision Industrial Motion Platform

Please message us with any questions.

This listing is for a USED EMERSON DJ3E2DP AC INDUCTION MOTOR.

3HP 3-phase industrial motor, suitable for pumps, conveyors, or general machinery where a JP pump-style flange mount is required. Open drip-proof enclosure for clean, dry environments.

See photos for details.

Part No: DJ3E2DP
Model: S471
Type: FD-1
Condition: USED
Horsepower: 3 HP
Voltage: 208–230/460V
Phase: 3
RPM: 1765
Frame: 182JP
Enclosure: Drip Proof
Service Factor: 1.15
FL Amps: 8.6–8.50 / 4.25

Please message us with any questions.

This listing is for a USED BOSCH DPR_EXPA2 YY47A.

Expansion module for Bosch Rexroth CNC systems. Designed to extend control capabilities in modular automation environments. Compatible with select Rexroth controllers.

See photos for details.

Part No: DPR_EXPA2 YY47A
Type: CNC Expansion Module
Condition: USED
Slot-In Modular Design
Industrial-Grade PCB
Compatible with Bosch Rexroth CNC Systems
Please message us with any questions.

NACHI MFM452H4V used hydraulics and pneumatics equipment available. Ideal for various applications requiring reliable performance. Good condition. Contact for details and pricing information.

Indu-Sol 114090000 PNMA Cu Profinet-Messstelle/Ethernet Messadapter for sale. This used Ethernet switch offers reliable connectivity. Ideal for network enthusiasts or professionals seeking a quality connector from a trusted manufacturer.

RTA 460ECPS-NNA1-D Module, used condition, available now. Reliable performance from a trusted manufacturer. Ideal for various applications. Contact us for more information or to discuss your needs.

SIEMENS PM240-2 Power Supply Module, model 6SL3210-1PE12-3UL1. Used condition. Ideal for replacing or upgrading existing systems. Note: Direct inquiries for more details.

B & B MANUFACTURING ESW208 Ethernet Switch, new condition, offers reliable connectivity solutions. Ideal for enhancing your network infrastructure with top-tier technology from a trusted manufacturer.

SIEMENS Model 6FX8002-2DC30 cables, new condition, ideal for your high-performance needs. Enhance your operations with these quality cables designed for reliability and efficiency.

SIEMENS Cables, Model 6FX8002-2CH00-1ABO, now available in new condition. Perfect for your needs, offering reliability and superior performance. Enhance your equipment setup with our high-quality product from a trusted manufacturer.

Used LAPP M08T-2GEN Ethernet Switch available. Ideal for reliable network setups. Condition: used. Suitable for various applications where performance and efficiency are needed. Don’t miss out on this opportunity to enhance your network infrastructure.

ECLIPSE 14756 Series 2000 AT Valve. Used valve by a trusted manufacturer, ECLIPSE. Model 14756. Ideal for various applications needing reliable control. Perfect for enhancing your operations. Secure your quality equipment today.