This listing is for a NEW NTN 6008ZZC3/EM & 6008ZZC3/L627.
Deep groove ball bearings with 40 mm bore and double metal shields. C3 clearance for high-speed applications. Suitable for electric motors, conveyors, and general industrial machinery.
See photos for details.
Part No: 6008ZZC3/EM, 6008ZZC3/L627
Type: Deep Groove Ball Bearings
Condition: NEW
Bore Diameter: 40 mm
Outer Diameter: 68 mm
Width: 15 mm
Shield Type: Double Shielded (ZZ)
Clearance: C3
Please message us with any questions.

This listing is for a NEW MITSUBISHI MR‑J3CN1 Servo Signal Connector Set (CN10) compatible with MR‑J3 and MR‑J4 series amplifiers.

– Includes connector housing and crimp cable end
– For use with 50‑pin CN10 servo amplifier port
– OEM quality from Mitsubishi Electric
– See photos for housing details and package condition

Part No: MR‑J3CN1
Type: Signal Connector (50‑pin CN10)
Condition: NEW, unused

New HUBBELL P200NBK Connectors available. Reliable and high-quality, these connectors are ideal for various applications. In pristine condition, they provide excellent connectivity solutions. Don’t miss adding these essential components to your toolkit.

This listing is for a USED Curtis CUS12 Relay Socket Base. It is designed for mounting and wiring relays in industrial control systems. This unit is categorized as a relay socket accessory and includes the following capabilities: secure relay connection, screw terminals for wiring, and compatibility with Curtis relay models.

This listing is for a NEW Cutler-Hammer 10250T. It is designed for use in industrial control panels as a pushbutton operator. This unit is categorized as a pushbutton switch and includes the following capabilities: modular operator body, no lens included, and compatible with 10250T series contact blocks

This listing is for a USED Allen Bradley 1734-MB I/O Base and 1734-RTB Terminal Block. It is designed for mounting and wiring POINT I/O modules in industrial control systems. This unit is categorized as a PLC accessory and includes the following capabilities: DIN rail mounting, secure terminal connections, and compatibility with POINT I/O modules.

This listing is for a NEW THK CF20UU-AB. It is designed for linear motion guidance in cam-driven automation systems. This unit is categorized as a Stud Type Cam Follower and includes the following capabilities 52mm outer diameter, 24mm width, M20x1.5 thread, sealed bearing with grease nipple.

This listing is for a NEW TELEMECANIQUE LADN02.
Instantaneous auxiliary contact block with 2 normally open contacts. Designed for front mounting on LC1D series contactors. Rated for up to 600V and 10A. Ideal for industrial control panels and automation systems.
See photos for details.
Part No: LADN02
Type: Instantaneous Auxiliary Contact Block
Condition: NEW
Contact Configuration: 2 NO
Voltage Rating: 600V
Current Rating: 10A
Mounting: Front mount
Terminal Type: Screw clamp
Please message us with any questions.

This listing is for a USED ABB 2CDS251001R0034.

This is a miniature circuit breaker (MCB) rated at 3A, single pole, with a C-curve trip characteristic. It mounts on DIN rail and is suitable for industrial control panels and automation systems. Rated for 400VAC and 72VDC applications.

See photos for details.

Part No: 2CDS251001R0034
Type: Miniature Circuit Breaker
Condition: USED
Voltage: 400V AC / 72V DC
Current: 3A
Mount: DIN Rail
Poles: 1
Curve: C-Curve
Please message us with any questions.

This listing is for a USED Amphenol 146-103 Relay Socket Base. It is designed for mounting and wiring relays in industrial control systems. This unit is categorized as a relay socket accessory and includes the following capabilities: secure relay connection, screw terminal wiring, and durable construction for industrial environments.

This listing is for a USED SIEMENS 6ES7 132-4BD02-0AA0.

Digital output module for the SIMATIC ET 200S distributed I/O system. Provides 4 outputs for 24 V DC loads with short-circuit protection and status indication.

See photos for details.

Part No: 6ES7 132-4BD02-0AA0
Type: Digital Output Module
Condition: USED
Channels: 4 DO
Output Voltage: 24 V DC
Output Current: 0.5 A per channel
Switching Frequency: 800 Hz (resistive)
Module Width: 15 mm

Please message us with any questions.

This listing is for a USED Siemens 6ES7 138-4CB11-0AB0 SIMATIC ET200S Power Module.

This 24V DC power module is designed for use with Siemens ET200S distributed I/O systems. It provides power to the backplane bus and connected I/O modules in a compact 15 mm housing.

See photos for details.

Part No: 6ES7 138-4CB11-0AB0
Type: Power Module
Condition: USED
Input Voltage: 24V DC
DIN rail mountable
15 mm module width
For ET200S distributed I/O systems

Please message us with any questions.

SIEMENS 6ES7 132-4BD02-0AA0 Simatic S7 digital output module available. Ideal for enhancing your PLC systems with seamless integration. Used condition, reliable for various applications.

This listing is for a used Siemens 6ES7 132-4BD02-0AA0 SIMATIC ET 200S digital output module.

Provides 4 PNP outputs at 24 VDC, up to 0.5 A per channel. Designed for use in ET 200S distributed I/O systems. DIN rail mountable and ideal for industrial automation environments.

Part No: 6ES7 132-4BD02-0AA0
Type: ET 200S Digital Output Module
Outputs: 4 × PNP, 24 VDC
Max Current: 0.5 A per channel
Mounting: DIN Rail
Condition: USED

This listing is for a Used DAYTON 4L290T V-Belt.

The 4L290T is a fractional horsepower (FHP) V-belt designed for light-duty power transmission applications. It is commonly used in HVAC systems, appliances, and small machinery. This belt features a durable rubber construction with polyester cord reinforcement for added strength and flexibility.

See photos for details.

Part No: 4L290T
Type: Fractional Horsepower V-Belt
Condition: Used
Outside Length: 29 inches
Top Width: 1/2 inch
Thickness: 5/16 inch (0.313 in)
Material: Gum Rubber with Polyester Cord
Temperature Range: -22°F to 194°F
Resistance: Heat, Oil, Static Conductive
Application: General Industrial, HVAC, Appliances
Belt Type: Closed Loop

Please message us with any questions.

This listing is for a USED Thomson SSUPB 16 Super Smart Pillow Block Linear Bearing.

High-performance linear bearing with self-aligning ball bushing design. Supports 1″ shaft diameter and provides smooth, low-drag motion with high load capacity. Ideal for precision linear motion in industrial automation systems.

See photos for details.

Part No: SSUPB 16
Type: Super Smart Ball Bushing Pillow Block
Condition: USED
Shaft Diameter: 1.000 in
Self-Aligning Design
Dynamic Load Capacity: 1,900 lbf
Closed Aluminum Housing
Length: 2.81 in
Height: 2.19 in
Width: 3.25 in
Please message us with any questions.

This listing is for a USED ABB 2CDS251001R0044.

This is a miniature circuit breaker (MCB) rated at 4A, single pole, with a C-curve trip characteristic. It mounts on DIN rail and is suitable for industrial control panels and automation systems. Rated for 230–400VAC and 72VDC applications.

See photos for details.

Part No: 2CDS251001R0044
Type: Miniature Circuit Breaker
Condition: USED
Voltage: 230–400V AC / 72V DC
Current: 4A
Mount: DIN Rail
Poles: 1
Curve: C-Curve
Please message us with any questions.

This listing is for a USED Siemens 6ES7 132-4BD00-0AA0. It is designed for digital output signal processing within SIMATIC ET 200S distributed I/O systems. This unit is categorized as a PLC I/O module and includes the following capabilities: 4 digital outputs, 24 V DC output voltage, and LED status indicators for each channel.

This listing is for a USED Siemens 6ES7 131-4BD00-0AA0. It is designed for digital input signal processing within SIMATIC S7-300 automation systems. This unit is categorized as a PLC I/O module and includes the following capabilities: 4 digital inputs, 24 V DC input voltage, and compatibility with ET 200S distributed I/O systems.

This listing is for a USED Gould Shawmut 20356R 1-Pole Fuse Holder. It is designed for mounting and securing a single fuse in electrical circuits. This unit is categorized as a Fuse Holder and includes the following capabilities: single-pole configuration, rugged construction, and compatibility with Gould Shawmut fuse blocks for industrial applications

This listing is for a USED Gould Shawmut 20356R 1-Pole Fuse Holder. It is designed for mounting and securing a single fuse in electrical circuits. This unit is categorized as a Fuse Holder and includes the following capabilities: single-pole configuration, rugged construction, and compatibility with Gould Shawmut fuse blocks for industrial applications.

This listing is for a USED Square D 9080FB3611 3-Pole Fuse Holder. It is designed for mounting and securing fuses in electrical circuits. This unit is categorized as a Fuse Holder and includes the following capabilities: three-pole configuration, rugged construction, and compatibility with Square D 9080 series components.

This listing is for a USED Potter & Brumfield R10-E1-X4-115V Relay. It is designed for general-purpose switching applications in industrial control systems. This unit is categorized as an Electromechanical Relay and includes the following capabilities: coil voltage 115V AC, DPDT contact configuration, and plug-in mounting style.

This listing is for a USED Potter & Brumfield K10P-11A15-120 Relay. It is designed for general-purpose switching applications in industrial control systems. This unit is categorized as an Electromechanical Relay and includes the following capabilities: coil voltage 120V AC, DPDT contact configuration, and plug-in mounting style.

This listing is for a USED Square D RS42V20 Relay Socket. It is designed for mounting and wiring Square D control relays in industrial automation systems. This unit is categorized as a Relay Socket and includes the following capabilities: secure relay interface, durable construction, and compatibility with Square D RS series relays.

This listing is for a USED Square D LR21455 3-Pole Fuse Holder. It is designed for mounting and securing fuses in electrical circuits. This unit is categorized as a Fuse Holder and includes the following capabilities: three-pole configuration, rugged construction, and compatibility with Square D fuse blocks for industrial applications.

This listing is for a USED Potter & Brumfield R10D-E1Y4-115V Relay (Lot of 2). These relays are designed for general-purpose switching applications in industrial control systems. This unit is categorized as an Electromechanical Relay and includes the following capabilities: coil voltage 115V AC, DPDT contact configuration, and plug-in mounting style. Note: Pins are bent.

This listing is for a NEW Allen-Bradley W28 Heater Element. It is designed for overload relay heater applications in motor protection systems. This unit is categorized as a heater element accessory and includes the following capabilities: precise thermal protection, compatibility with Allen-Bradley overload relays, and durable construction for industrial environments.

This listing is for a USED Allen-Bradley 700-HN127 Relay Socket. It is designed for mounting and connecting Allen-Bradley relays in industrial control systems. This unit is categorized as a relay socket accessory and includes the following capabilities: rated for 10A, 300V, screw terminal connections, and DIN rail or panel mounting compatibility.

This listing is for a USED Square D 8501KP12V20 Relay. It is designed for industrial control applications requiring reliable switching. This unit is categorized as a control relay and includes the following capabilities: DPDT contact configuration, 120VAC coil voltage, and plug-in mounting for easy installation.