This listing is for a NEW DODGE P2B-SC-115 Pillow Block Bearing Unit.
Heavy-duty 2-bolt pillow block bearing designed for industrial applications. Features a 1-15/16″ bore, set screw locking, and single lip contact seal. Cast iron housing with relubrication capability ensures long service life in demanding environments.
See photos for details.
Part No: P2B-SC-115
Type: Pillow Block Ball Bearing Unit
Condition: NEW
Bore Diameter: 1-15/16 in
Mounting Type: 2-Bolt Base
Locking Device: Set Screw
Seal Type: Single Lip Contact
Housing Material: Cast Iron
Relubricatable: Yes
Please message us with any questions.

FAG 6014 bearings, brand new; ideal for efficient performance in various applications. Trusted quality ensures durability and reliability. Get these essential components to enhance your machinery’s operation.

SKA model 46627 bearings, brand new condition, ready to enhance your equipment with precision and reliability. Ideal for various applications requiring high-quality performance. Limited stock available, contact for details.

This listing is for a NEW INA RDC-099912.
Radial insert ball bearing housing unit with sealed deep groove ball bearing and cast housing. Designed for industrial applications requiring static misalignment compensation and reliable performance under moderate loads.
See photos for details.
Part No: RDC-099912
Type: Radial Insert Ball Bearing Housing Unit
Condition: NEW
Bearing Type: Deep Groove Ball Bearing
Locking Mechanism: Eccentric Collar or Grub Screws
Sealing: Multi-Piece Seals
Housing Material: Cast Iron or Sheet Steel
Please message us with any questions.

Timken bearings, model AX655578HSP, in pristine new condition. Ideal for enhancing machinery performance. Perfect for industries requiring reliable, high-quality components. Ensure optimal operations with these premium bearings.

New NACHI 22308EXQ bearings available now. These high-quality bearings, known for their reliability and efficiency, are in pristine condition. Ideal for various industrial applications demanding durability and performance.

This listing is for a NEW BROWNING VPS-210. It is designed for shaft support and alignment in rotating equipment. This unit is categorized as a Pillow Block Bearing and includes the following capabilities: 5/8″ bore diameter, cast iron housing, and grease fitting for lubrication.

This listing is for a NEW DODGE RDC-075464.
Roller chain drive coupling for 3/4″ shafts. Includes two steel sprockets and ANSI roller chain. Designed for industrial power transmission applications requiring flexible shaft connection.
See photos for details.
Part No: RDC-075464
Type: Roller Chain Drive Coupling
Condition: NEW
Shaft Size: 3/4 in
Material: Steel
Includes: Two Sprockets + ANSI Roller Chain
Max RPM: ~3,600 RPM
Please message us with any questions.

This listing is for a NEW TIMKEN RDC-078741.
Roller chain coupling for 1-1/8″ shafts. Includes two steel sprockets and ANSI roller chain. Designed for industrial power transmission applications requiring flexible shaft connection.
See photos for details.
Part No: RDC-078741
Type: Roller Chain Coupling
Condition: NEW
Shaft Size: 1-1/8 in
Material: Steel
Includes: Two Sprockets + ANSI Roller Chain
Max RPM: ~3,600 RPM
Please message us with any questions.

This listing is for a NEW MORSE 127725. It is designed for mechanical power transmission in industrial drive systems. This unit is categorized as a roller chain and includes the following capabilities: 10FT length, 60R pitch configuration, and riveted steel construction.

This listing is for a NEW SKF 22218 EK.
Spherical roller bearing with tapered bore and double row design. Accommodates heavy radial and axial loads in both directions. Ideal for industrial machinery with shaft misalignment and high load demands.
See photos for details.
Part No: 22218 EK
Type: Spherical Roller Bearing
Condition: NEW
Bore Diameter: 90 mm
Outside Diameter: 160 mm
Width: 40 mm
Bore Type: Tapered 1:12
Load Rating: 331 kN Dynamic / 375 kN Static
Speed Rating: 3,800 RPM Reference / 5,300 RPM Limit
Please message us with any questions.

IKO NURT 40R is a Cylindrical Roller Follower Bearing designed for high-load cam and linear motion applications. This Full Complement Type includes an inner ring and crowned outer ring, offering enhanced durability and shock resistance. Compatible with various industrial automation systems.

This listing is for a NEW INA NATV10-X-PP-A.
Yoke type track roller with full complement needle rollers and lip seals on both sides. Designed for high radial loads and moderate axial loads in cam and track applications. Suitable for conveyor systems, linear guides, and cam mechanisms.
See photos for details.
Part No: NATV10-X-PP-A
Type: Yoke Type Track Roller
Condition: NEW
Bore Diameter: 10 mm
Outside Diameter: 30 mm
Width: 14 mm
Seal Type: PP (Lip Seals on Both Sides)
Load Rating (Dynamic): 9500 N
Load Rating (Static): 15100 N
Please message us with any questions.

This listing is for a NEW KOYO 69112RUC2 ball bearing, new in factory box.

This is a high-quality, double-sealed deep groove ball bearing with C2 internal clearance. Manufactured by KOYO, this bearing is suitable for high-speed applications including motors, pumps, and industrial equipment.

See photos for details.

Part No: 69112RUC2
Type: Deep Groove Ball Bearing
Condition: NEW (In Box)
Double rubber seals (2RU)
C2 internal clearance
Pre-lubricated and sealed for extended life
Please message us with any questions.

This listing is for a NEW TIMKEN RA103RR2 + COL.
Insert ball bearing with 1-1/4″ bore and eccentric locking collar. Features molded shroud seals and factory lubrication. Ideal for industrial applications requiring secure shaft mounting and sealed bearing performance.
See photos for details.
Part No: RA103RR2 + COL
Type: Insert Ball Bearing with Eccentric Locking Collar
Condition: NEW
Bore Diameter: 1-1/4 in
Outer Diameter: 2.441 in
Seal Type: Molded Shroud (RR2)
Locking Mechanism: Eccentric Collar (COL)
Static Load Rating: 2,530 lbf
Dynamic Load Rating: 4,850 lbf
Please message us with any questions.

This listing is for a NEW MiSumi A-LHIFRF30.
Pilot flanged linear ball bearing with 30 mm bore and 64 mm overall length. Designed for smooth and accurate linear motion in industrial automation systems. Features high-grade accuracy and stainless steel retainer.
See photos for details.
Part No: A-LHIFRF30
Type: Pilot Flanged Linear Ball Bearing
Condition: NEW
Bore Diameter: 30 mm
Outer Diameter: 45 mm
Overall Length: 64 mm
Dynamic Load Rating: 1,570 N
Static Load Rating: 2,740 N
Operating Temp: -20°C to 80°C
Please message us with any questions.

Timken 30205M-90KM1 bearings, new condition. Ideal for industrial applications requiring reliable performance and durability. Perfect for maintaining smooth operations. Don’t miss out on this essential equipment upgrade!

This listing is for a NEW REXNORD RC35 RIV. It is designed for mechanical power transmission in industrial drive systems. This unit is categorized as a roller chain and includes the following capabilities: 10FT length, 320 pitches, and durable steel construction.

This listing is for a NEW SKF 6016-2RS1.
Single row deep groove ball bearing with contact seals on both sides. Designed for high-speed applications with low friction and noise. Suitable for radial and axial loads in both directions.
See photos for details.
Part No: 6016-2RS1
Type: Deep Groove Ball Bearing
Condition: NEW
Bore Diameter: 80 mm
Outside Diameter: 125 mm
Width: 22 mm
Dynamic Load Rating: 49.4 kN
Static Load Rating: 40 kN
Limiting Speed: 3,200 RPM
Sealing: Contact Seal on Both Sides
Please message us with any questions.

NSK 6302ZZCEBAS2S bearings, brand new and ready for your application. Perfect for ensuring smooth and efficient operations.

Timken Model IM19025 Bearings for sale. Brand new and in pristine condition. Ideal for various industrial applications, ensuring optimal performance and reliability.

This listing is for a NEW MORSE 153318. It is designed for mechanical power transmission in industrial drive systems. This unit is categorized as a roller chain and includes the following capabilities: 10FT length, 50LL R pitch configuration, and durable steel construction.

This listing is for a NEW SMITH CR-2-XB.
Stud-type cam follower with 2″ roller diameter and sealed needle roller bearing. Features hex socket head, 7/8-14 threaded stud, and relubrication port. Ideal for industrial automation, conveyors, and material handling systems.
See photos for details.
Part No: CR-2-XB
Type: Stud-Type Cam Follower
Condition: NEW
Roller Diameter: 2.000 in
Roller Width: 1.250 in
Stud Diameter: 0.875 in
Thread Size: 7/8-14 UNF
Load Rating (Dynamic): 10,370 lbs
Load Rating (Static): 10,700 lbs
Closure Type: Sealed
Please message us with any questions.

This listing is for a New SNR 61824.EE. It is designed for high-speed rotational applications requiring low friction and precision. This unit is categorized as a deep groove ball bearing and includes the following capabilities: single-row design, sealed construction, and metric dimensions.

This listing is for a NEW DODGE F2BSC103 Flange-Mount Ball Bearing Unit.
Standard-duty 2-bolt flange bearing with 1-3/16″ bore and set screw locking. Ideal for conveyors, mechanical drives, and industrial machinery. Cast iron housing with single lip contact seal and relubrication capability.
See photos for details.
Part No: F2BSC103
Type: Flange-Mount Ball Bearing Unit
Condition: NEW
Bore Diameter: 1-3/16 in
Mounting Style: 2-Bolt Flange
Locking Mechanism: Set Screw
Housing Material: Cast Iron
Seal Type: Single Lip Contact Seal
Relubricatable: Yes
Max RPM: 6500
Please message us with any questions.

This listing is for a NEW DODGE F2BSC103.
Flange-mount ball bearing unit with 1-3/16″ bore and 2-bolt cast iron housing. Features set screw locking and single lip contact seal. Suitable for standard-duty applications requiring fixed, non-expansion bearings.
See photos for details.
Part No: F2BSC103
Type: Flange-Mount Ball Bearing Unit
Condition: NEW
Bore Diameter: 1-3/16 in
Mounting: 2-Bolt Flange
Locking Mechanism: Set Screw
Housing Material: Cast Iron
Seal Type: Single Lip Contact Seal
Please message us with any questions.

This listing is for a NEW BROWNING VPS-212.
Pillow block bearing with 3/4″ bore, cast iron housing, and set screw locking. Ideal for standard-duty industrial applications. Includes relubrication fitting and single lip contact seal with flinger.
See photos for details.
Part No: VPS-212
Type: Pillow Block Ball Bearing
Condition: NEW
Bore Diameter: 0.75 in
Base to Center Height: 1.311 in
Bolt Center to Center: 3.8 in
Cast Iron Housing
Set Screw Locking
Please message us with any questions.

This listing is for a NEW FAFNIR 9110PP.
Single row deep groove ball bearing with 50 mm bore, 80 mm OD, and 16 mm width. Features double contact rubber seals and C3 internal clearance for high-speed applications. Ideal for electric motors, gearboxes, and industrial machinery.
See photos for details.
Part No: 9110PP
Type: Deep Groove Ball Bearing
Condition: NEW
Bore Diameter: 50 mm
Outside Diameter: 80 mm
Width: 16 mm
Seal Type: PP (Double Contact Rubber Seals)
Internal Clearance: C3
Max Speed: 4615 RPM
Please message us with any questions.

This listing is for a NEW MCGILL MCYR 17.
Metric yoke-type cam follower with 40 mm crowned roller and sealed needle roller bearing. Designed for high-load linear motion applications in industrial automation. Features LUBRI-DISC® seal and chrome steel construction.
See photos for details.
Part No: MCYR 17
Type: Metric Yoke-Type Cam Follower
Condition: NEW
Roller Diameter: 40 mm
Bore Diameter: 17 mm
Roller Width: 40 mm
Closure Type: Sealed
Bearing Element: Needle Rollers
Material: Chrome Steel
Please message us with any questions.

This listing is for a NEW TIMKEN SAS 3/4.
Pillow block ball bearing unit with 3/4″ bore and 2-bolt cast iron housing. Features a sealed ball bearing insert with set screw locking and narrow shroud seal. Ideal for medium-duty industrial applications.
See photos for details.
Part No: SAS 3/4
Type: Pillow Block Ball Bearing Unit
Condition: NEW
Bore Diameter: 3/4 in
Mounting Type: 2-Bolt Base
Housing Material: Cast Iron
Seal Type: Narrow Shroud
Locking Mechanism: Set Screw
Dynamic Load Rating: 3,200 lbf
Static Load Rating: 1,400 lbf
Please message us with any questions.