This lot includes 11 brand-new Balluff cordsets, model BCC M415-M414-3A-304-EX44T2-050. These industrial-grade sensor/actuator cables are built for reliable signal and power transmission in automation and factory environments. Each cable features high-performance connectors with secure locking mechanisms and is engineered for use in harsh conditions. The M12 connector configuration provides broad compatibility with industrial I/O systems, making this cable lot ideal for system builders, OEMs, and automation integrators seeking ready-to-install connectivity.

This listing is for a NEW RITTAL SZ 2500.400. It is designed as a 3-pole connection cable for LED system lights in the Rittal SZ series. This unit is categorized as a power cable and includes the following capabilities: 3000mm length, 100–240V AC input, and 1.5mm² conductor cross-section.

This listing is for a NEW MITSUBISHI MR-PWS1CBL5M-A1-L.

5-meter servo motor power cable for Mitsubishi HF-series motors. Features IP65 protection, servo connector, and bare flying leads for direct load-side connection.

See photos for details.

Part No: MR-PWS1CBL5M-A1-L
Type: Servo Motor Power Cable
Condition: NEW
Cable Length: 5 meters
Connector Type: Servo motor connector + bare leads
Protection Rating: IP65
Compatible Motors: HF-KP, HF-KN, HF-MP
Please message us with any questions.

Industrial-grade female cordset designed for sensor and actuator connectivity in demanding environments.

See photos for details.

Part No: 912580
Type: Female Cordset
Condition: USED

Connector: 7/8″, 3-pin, straight socket
Cable: STOOW, 2 meters, yellow PVC jacket
Voltage Rating: Up to 600 V
Current Rating: 13 A
IP67 rated for dust and water resistance
Operating Temp: -40 to 105 °C
UL Listed, cULus General Purpose
Ideal for factory automation and control systems

Mini-Change® circular cable assembly designed for industrial automation and sensor connectivity in rugged environments.

See photos for details.

Part No: 1300061312
Type: Circular Cable Assembly
Condition: USED

Connector: 5-pin female plug to wire leads
Cable Length: 6 ft (1.83 m)
Cable Type: Round PVC, unshielded
Voltage Rating: 600 V
Current Rating: 13 A
IP67 rated for dust and water resistance
Free-hanging (in-line) mounting
Ideal for sensors, actuators, and distributed I/O systems

Mini-Change® 5-pin female cordset designed for rugged industrial quick-connect applications.

See photos for details.

Part No: 105000C01F120
Type: Female Cordset
Condition: USED

Connector: 7/8-16 UN straight female to pigtail
Cable: 12 ft (3.66 m), 16 AWG SOO rubber jacket
Voltage Rating: 600 VAC
Current Rating: 8 A
5-pole, single keyway configuration
Black epoxy-coated zinc coupling nut
Gold-plated copper alloy contacts
IP67 rated for dust and water protection
Anti-vibration design for secure connections

Balluff BCC0LJR used cables available. Ideal for various applications, offering reliable performance. Compact design by trusted manufacturer Balluff. Sold as-is, perfect for those seeking cost-effective solutions.

BANNER MQEAC-430RA cable in used condition, ready to fulfill your wiring needs. Ideal for professionals seeking reliable, established quality in equipment. Contact us for more details on this dependable model.

New L-COM CSMUAB-5M Cable available. Manufactured by L-COM, this cable is in pristine condition and ready for integration into your setup. Ideal for reliable connectivity solutions in various applications.

IFM EVC909 Sensor Cable available in new condition. Manufactured by IFM, this EVC909 cable is ideal for various applications. Secure your premium quality cable now for reliable performance. Limited stock, act quickly to enhance your setup.

IFM EVC908 cables available. Manufacturer: IFM. Model: EVC908. Type: Cables. Condition: used. Ideal for various industrial applications. Secure your reliable connectivity solution today!

BALLUFF BCC052T sensor cordsets available. This used equipment from renowned manufacturer BALLUFF is perfect for your needs. Ideal for various applications, ensure efficient operation with these reliable sensor cordsets. Limited stock, act fast!

This listing is for a NEW ALLEN BRADLEY 1202-C10. It is designed for use in industrial automation systems as a communications cable. This unit is categorized as a PLC accessory and includes the following capabilities: 1 meter length, Scanport compatibility, and durable construction for drive-to-controller communication.

This listing is for a New Cooper CHDN-EAE-T3. It is designed as a Mini-Line DeviceNet connector assembly with 5-pole male-to-female inline configuration. This unit is categorized as a trunk cable and includes the following capabilities: 3-meter length, 300V rating, 8A current capacity.

This listing is for a New Rittal SZ 2500.410. It is designed as a 2-pole power cord for LED system lights in the Rittal SZ series. This unit is categorized as a power cable and includes the following capabilities: 3000mm length, 2-pole configuration, and compatibility with Rittal LED lighting systems.

This listing is for a NEW PRO-ELEC PSG02085 mains power cable.

This is a 1.8-meter UK mains power lead with a BS1363 plug to IEC C13 connector, suitable for computers, monitors, power supplies, and other compatible electronics.

See photos for details.

Part No: PSG02085
Type: UK Mains to IEC C13 Power Cable
Condition: NEW
Length: 1.8 meters (approx. 6 ft)
BS1363 plug to IEC C13
Rated 250V 10A
Please message us with any questions.

TURCK RSCD RKCD 440-10M Ethernet Cableset, 10 meters. From the reliable TURCK brand, this used cableset is in its original bag, offering a practical solution for your networking needs. Suitable for various applications, ensure seamless connectivity with this quality product.

AUTOMATION DIRECT CD12M-0B-070-C1 used cable in reliable condition. Perfect for a range of applications. Excellent for those seeking quality components from a trusted manufacturer.

Turck RK4.4T-5 Cable/Cord Set Supplies now available. Brand new condition, delivering reliability and performance. Perfect for enhancing connectivity and ensuring optimal operation in your applications.

MOLEX 1200660895 cables, new condition. Enhance your setup with reliable connectivity from a trusted manufacturer. Ideal for various applications where dependable and robust cabling solutions are essential.

TURCK RK 4.5T-5-RS 4.5T/S1587 cordset, new and weld spatter resistant. Ideal for cable tray applications, ensuring long-lasting performance in demanding environments. Get reliable TURCK quality today!

BALLUFF BCC-M425-M414-3A-304-EX44T2-020 Sensor Cable, new. Enhance your system’s connectivity with this top-quality sensor cable from BALLUFF, designed for reliable performance. Ideal for various applications in industrial automation.

BANNER ENGINEERING PHOTOELECTRIC SENSOR MQDC1-515 available. Manufactured by BANNER ENGINEERING, model MQDC1-515. Classified under cables and in brand new condition. Get the reliability and performance you need with this top-tier sensor.

Manufactured by BALLUFF, this BCC-M425-M414-3A-304-EC44T2-050 model is in brand-new condition, perfect for your equipment needs. Ideal for ensuring reliable connections and top performance in various applications.

This listing is for a New Brad Connectivity 114030K12M010. It is designed as a Mini-Change double-ended cordset with 4-pole straight male to straight female connectors. This unit is categorized as a quick-disconnect cable and includes the following capabilities: 600V rating, 10A current, 1-meter TPE jacket.

Brand new L-COM CS2N9MF-15 cables available. Ensure secure connections with top-quality design from a trusted manufacturer. Perfect for enhancing your setup efficiently and reliably. Ideal for tech professionals needing dependable cabling solutions.

The ALLEN BRADLEY 888N-F4AF1-9F 4-Pin Mini Female Straight Connector is a new, high-performance industrial cable designed for secure and efficient connectivity in automation and control systems. With a 4-pin mini female straight connector, 16AWG wiring, and a 9-foot cable length, this cable ensures reliable signal transmission and durability in harsh environments. Engineered for use with sensors, actuators, and industrial machinery, it provides seamless integration for various manufacturing and automation applications.