This listing is for a NEW SIEMENS 6ES7 972-0BA52-0XA0. It is designed for PROFIBUS DP communication in SIMATIC S7 systems. This unit is categorized as a bus connector and includes the following capabilities: 90° cable outlet, integrated terminating resistor, and diagnostic LED.

This listing is for a NEW SIEMENS 6ES7 392-1AM00-0AA0. It is designed for use with SIMATIC S7-300 PLC systems to provide secure module connectivity. This unit is categorized as a PLC connector and includes the following capabilities: DIN rail mounting, reliable signal transmission, and compatibility with Siemens S7-300 modules.

Used Allen Bradley 1492-IFM20F-F24-2 Digital I/O available now. Ideal for various applications, this equipment is a reliable component for your industrial needs. Act fast to secure this in-demand model.

This listing is for a New Cooper CHDN-EAE-T3. It is designed as a Mini-Line DeviceNet connector assembly with 5-pole male-to-female inline configuration. This unit is categorized as a trunk cable and includes the following capabilities: 3-meter length, 300V rating, 8A current capacity.

This listing is for a New Siemens TSLF3. It is designed as an extended terminal shield for VL150XUL and VL250UL molded case circuit breakers. This unit is categorized as a breaker accessory and includes the following capabilities: 3-pole configuration, composite housing, and IP30 protection.

This listing is for a New Allen Bradley 1494V-FS30. It is designed for trailer disconnect applications using Type J fuses. This unit is categorized as a fuse block and includes the following capabilities: 30A rating, 600V max, DIN rail mount.

MITSUBISHI AJ65SBTB1-32T PLCs/Machine Control in used condition available. Ideal for automating applications, this unit is designed to deliver reliable performance. Enhance your system with trusted Mitsubishi technology.

This listing is for a New Rittal SZ 2500.410. It is designed as a 2-pole power cord for LED system lights in the Rittal SZ series. This unit is categorized as a power cable and includes the following capabilities: 3000mm length, 2-pole configuration, and compatibility with Rittal LED lighting systems.

COOPER 5362W, brand new condition. Enhance your equipment lineup with this versatile model, crafted for reliability and performance. Perfect for a variety of applications. Discover quality with COOPER’s latest offering.

This listing is for a NEW TWECO WS44-3545-15. It is designed as a steel-wound conduit liner for MIG welding guns. This unit is categorized as a welding accessory and includes the following capabilities: 15-foot length, supports .035″ to .045″ steel wire, and compatible with 400A air-cooled MIG guns.

NACHI 6204 ZZEC3 radial ball bearing, new condition. Ideal for enhancing machinery performance. Built by trusted manufacturer NACHI, model 6204 ZZEC3, this bearing promises durability and precision. Perfect addition to your industrial equipment.

This listing is for a USED ABB S202-C4. It is designed for overcurrent protection in industrial and commercial electrical systems. This unit is categorized as a 2-Pole Circuit Breaker and includes the following capabilities: 4A current rating, DIN rail mounting, and fast trip response.

This listing is for a NEW HENRY SCHEIN 101-5032. It is designed for dental lab use in creating wax patterns and restorations. This unit is categorized as Wire Wax and includes the following capabilities: 6 gauge thickness, blue color for visibility, and flexible shaping properties.

This listing is for a NEW CARMEL WIRE WAX 8 Gauge Blue 0.5lbs. It is designed for industrial marking, layout, and wire coating applications. This unit is categorized as a Wire Wax Compound and includes the following capabilities: 8 AWG gauge compatibility, blue color for visibility, and 0.5 lb spool weight.

This listing is for a USED FANUC A20B-2902-0371.
16MB SRAM memory module for FANUC Series 20 CNC systems. Designed for high-speed data access and reliable performance in industrial automation environments.
See photos for details.

Part No: A20B-2902-0371
Type: Memory Expansion PCB
Condition: USED
Memory: 16MB SRAM
Voltage: 5V DC
Please message us with any questions.

This listing is for a USED FANUC A20B-2902-0531.
4MB DRAM memory expansion PCB for FANUC Series 20 CNC systems. Used to enhance processing capabilities in industrial automation and robotic control environments.
See photos for details.

Part No: A20B-2902-0531
Type: Memory Expansion PCB
Condition: USED
Memory: 4MB DRAM
Compatibility: FANUC Series 20
Please message us with any questions.

This listing is for a NIB Parker CB152HL001 cylinder body seal kit.
It is designed for sealing and maintenance of Parker hydraulic cylinders.

See photos for details.

Part No: CB152HL001
Manufacturer: Parker
Type: Cylinder Body Seal Kit
Condition: NEW

This listing is for a NEW SCHNEIDER ELECTRIC ZBE204.
Double contact block with 2 normally closed contacts for Harmony XB4/XB5 push button assemblies. Features screw clamp terminals and silver alloy contacts. Rated for 6A at 120VAC. Ideal for industrial control panels.
See photos for details.
Part No: ZBE204
Type: Contact Block
Condition: NEW
Contact Configuration: 2 NC
Terminal Type: Screw Clamp
Rated Current: 6A @ 120VAC
Mounting: 22 mm Push Button Head
Please message us with any questions.

This listing is for a NEW MCGILL CF 1 3/4 SB.
Stud-type cam follower from the CAMROL series. Features a flat roller surface, sealed bearing design, and hex socket for easy installation. Ideal for high-load, linear motion applications.
See photos for details.
Part No: CF 1 3/4 SB
Type: Stud-Type Cam Follower
Condition: NEW
Roller Diameter: 1.7500 in
Roller Width: 1.0000 in
Stud Diameter: 0.7500 in
Thread: 3/4-16 UNC
Seal Type: LUBRI-DISC®
Relubricatable, Hex Hole
Please message us with any questions.

This listing is for a USED SIEMENS 3RV1021-1KA10.

Motor protection circuit breaker for industrial applications.
DIN rail mounted, thermal/magnetic trip, 3-pole, 9–12.5 A range.

See photos for details.

Part No: 3RV1021-1KA10
Type: Motor Protection Circuit Breaker
Condition: USED
Voltage: 400–690 VAC / VDC
Current Range: 9–12.5 A
Short-Circuit Release: 163 A
Mounting: DIN Rail
Trip Type: Thermal/Magnetic
Please message us with any questions.

This listing is for a USEDSiemens 6ES7 138-4FA01-0AB0.

SIMATIC ET 200S Fail-Safe Digital Input Module with 4/8 inputs for safety-critical applications. Supports PROFIsafe protocol and EX-rated environments.
See photos for details.

Part No: 6ES7 138-4FA01-0AB0
Type: Fail-Safe Digital Input Module
Condition: USED
Inputs: 4/8 F-DI
Voltage: 24 V DC
Power Loss: Typ. 4 W
Mounting Width: 30 mm
Protection: EX-rated
Please message us with any questions.

This listing is for a NEW FEDERAL SIGNAL LSL-024A.

Litestak stack light module with amber lens for visual status indication in industrial environments. Designed for 24VDC operation with steady-burn mode.

See photos for details.

Part No: LSL-024A
Type: Stack Light Module
Condition: NEW
Voltage: 24 VDC
Current: 0.76 A
Wattage: 15 W
Light Output: 123 cd
Lens Color: Amber
Mounting: Surface or 3/4″ NPT Pipe
Enclosure: NEMA Type 1
Lamp Life: 2,500 hours

Please message us with any questions.

This listing is for a NEW FEDERAL SIGNAL LSL-024G.

Litestak stack light module with green lens for visual status indication in industrial environments. Designed for 24VDC operation with steady or flashing modes (flasher sold separately).

See photos for details.

Part No: LSL-024G
Type: Stack Light Module
Condition: NEW
Voltage: 24 VDC
Current: 0.76 A
Wattage: 15 W
Light Output: 123 cd
Lens Color: Green
Mounting: Surface or 3/4″ NPT Pipe
Enclosure: NEMA Type 1
Lamp Life: 2,500 hours

Please message us with any questions.

This listing is for a USED FANUC A03B-0819-C011.

I/O Interface Module AIF01A for FANUC CNC and automation systems.
24 VDC, 2 AMP Max. Replaces A03B-0807-J011 and A03B-0807-C011.
Compatible with 5-slot and 10-slot I/O base units.

See photos for details.

Part No: A03B-0819-C011
Type: I/O Interface Module
Condition: USED
Voltage: 24 VDC
Current: 2 AMP Max
Model: AIF01A
Please message us with any questions.

This listing is for a USED Phoenix Contact FL SWITCH SFNB 5TX.

Industrial unmanaged Ethernet switch with 5 RJ45 ports supporting 10/100 Mbps. Designed for DIN rail mounting in control cabinets. Features auto-negotiation, autocrossing, and LED diagnostics.

See photos for details.

Part No: FL SWITCH SFNB 5TX
Type: Industrial Ethernet Switch
Condition: USED
Ports: 5 RJ45
Speed: 10/100 Mbps
Voltage: 24 VDC (12–48 VDC range)
Mounting: DIN Rail
Housing: Aluminum, IP20
Please message us with any questions

This listing is for a USED FANUC A03B-0819-C011.

I/O interface module (Model AIF01A) for FANUC CNC and robot control systems. Provides stable 24VDC input/output connectivity for modular rack setups.

See photos for details.

Part No: A03B-0819-C011
Type: I/O Interface Module
Condition: USED
Input Voltage: 24 VDC
Current Rating: 2 A max
Model: AIF01A
Replaces: A03B-0807-J011, A03B-0807-C011

Please message us with any questions.

This listing is for a USED FANUC A03B-0819-C011.

This is a digital I/O interface module designed for FANUC control systems. It provides reliable signal exchange between CNC components and supports integration within Series 16/18/21 systems.

See photos for details.

Part No: A03B-0819-C011
Type: I/O Interface Module
Condition: USED
Function: Digital input/output interface
Mounting: Rack-mounted
Please message us with any questions.

This listing is for a Targus 40139382 component/accessory—seller must specify compatibility (e.g., laptop case, docking station, power tip).

Please ensure compatibility with your Targus laptop docking station, shielded case, or accessory device.

Condition: [UNKNOWN—please confirm]
Part No: 40139382
Type: Targus accessory/part (specific function TBD)
Note: Verify intended device before purchase; contact for questions.

High-strength socket head cap screw designed for heavy-duty fastening in industrial and structural applications.

See photos for details.

Part No: 182059
Type: Socket Head Cap Screw
Condition: USED

Size: M42 × 180mm
Thread: Half-threaded
Grade: 12.9 alloy steel
Finish: Black oxide
High tensile strength and fatigue resistance
Ideal for machinery, automotive, and structural assemblies
Manufactured to ISO 4762 and ASME B18.3.1M standards

This listing is for a USED FUJITSU B19-6 S26361-K1374-V140.

This is a 19″ LED monitor with a 5:4 aspect ratio, ideal for business and industrial applications. It features VGA and DVI inputs and built-in speakers.

See photos for details.

Part No: S26361-K1374-V140
Type: 19″ LED Monitor
Condition: USED
Resolution: 1280 x 1024 (SXGA)
Brightness: 250 cd/m²
Inputs: VGA, DVI-D, Audio In

Please message us with any questions.