The Allen Bradley 1746-IV16/C is a reliable and efficient SLC 500 input module designed for handling digital signals with precision. As a used module, it offers a cost-effective solution for expanding the input capabilities of your control system without compromising on performance. This 16-point input module supports a range of industrial automation applications and is built to integrate seamlessly into your existing Allen Bradley SLC 500 setup.

This used Allen-Bradley 1746-IB32/C Input Module is a high-density digital input module designed for industrial automation systems. With 32 input channels for 24V DC signals, this module provides efficient and reliable signal processing for demanding applications. It is fully compatible with the Allen-Bradley SLC 500 series, making it an ideal choice for system expansions, upgrades, or replacements.

The Allen Bradley 1746-OB16/D is a dependable digital output module for the SLC 500 series, designed to deliver consistent performance in industrial automation environments. With its 16-point digital output capability, this module ensures efficient control over connected devices, making it an ideal choice for expanding the functionality of your programmable logic controller (PLC) system. Compact and robust, it integrates seamlessly with your existing SLC 500 setup, providing a cost-effective and reliable solution for various automation needs.

ALLEN BRADLEY 440R-ZBE820AZ1 Expansion Relay available. Manufacturer: ALLEN BRADLEY. Model: 440R-ZBE820AZ1. Type: Relay. Condition: used. Ideal for various industrial applications.

NVENT HOFFMAN A606CH junction box. Model A606CH, used electric box from a reputable manufacturer. Ideal for various electrical applications, this pre-owned unit is ready for integration. Secure this practical and reliable equipment for your needs.

The Allen Bradley 1756-CNB/D is a ControlNet Bridge Module designed for ControlLogix systems, enabling high-speed communication between ControlNet devices and the ControlLogix backplane. It ensures seamless data exchange in distributed industrial automation systems. As a reliable used module, the 1756-CNB/D offers an economical way to enhance or maintain your network infrastructure while delivering excellent performance and compatibility.

The Allen Bradley 1734-MB POINT I/O Mounting Base is an essential component for securing POINT I/O modules within distributed control systems. This used mounting base provides a reliable connection point between POINT I/O modules and the backplane, ensuring stable operation and ease of system configuration. Its compact and durable design makes it ideal for industrial environments where space-saving and robust solutions are required.

SCHNEIDER ELECTRIC LU9GC3 Modbus Hub Contactor, ideal for professional electrical systems. Used condition. Maximize your setup with this reliable component from a trusted manufacturer.

SIEMENS 3RV1901-1A Auxiliary Contact Switch available in used condition. Ideal for enhancing electrical control systems. Ensure compatibility with your setup. Act now to secure this crucial component for your application.

UNKNOWN model grinding stone, new condition. Ideal for tool applications and crafted for durability. Perfect addition for workshops seeking reliable performance. Discover efficiency with this essential equipment today.

GREATECH HTK-PCB-00052A BARE I/O PCB USED test description tab

KOYO B-1212;PB;L125 bearings, new condition. Ideal choice for applications requiring high-quality bearing solutions. Enhance your equipment’s performance with reliable KOYO engineering.

This listing is for a USED ABB 1SNA607217R0200 End Plate for terminal blocks.

Designed to mount on DIN rail to cap the end of ZS35 terminal blocks in the SNK series. Provides structural and electrical isolation for terminal assemblies.

See photos for details.

Part No: 1SNA607217R0200
Type: DIN Rail End Plate
Condition: USED
For Use With: ABB ZS35 Terminal Blocks
Color: Grey
Material: Flame-retardant Polyamide
Please message us with any questions.

MITSUBISHI AJ65SBTB1-32T1 PLCs/Machine Control unit available. Ideal for integration into existing systems. Reliable Mitsubishi quality in used condition. Suitable for various industrial applications.

One pretty cool oven. Test 1. 2. 3

TEST ITEM DO NOT BID

2022 GROB G550 5-axis CNC Horizontal Machining Center with Pallet Changer option. Features include X: 31.49″, Y: 40.15″, Z: 40.15″, HSK-63A, 12,000 rpm spindle, 70 Station ATC. Excellent choice for precision machining needs.

DEGREASER SYSTEM WITH STILL AND AUTO LOADING
⦁ 100% Freeboard Ratio
⦁ Water Cooled Primary Condensing Coils
⦁ Vapor Trap™ Sub-Zero Refrigerated Freeboard Coils
⦁ Stainless Steel Finned Coils
⦁ Heavy Gauge Stainless Steel Tank Construction
⦁ Fully Insulated Tanks
⦁ Brushed Stainless Steel Insulation Panels
⦁ Water Separator with Secondary Water Cooling Coil
⦁ Easy Open Clean Out Door
⦁ Electric Low Watt Density Immersion Heaters
⦁ Solvent Vapor Control
⦁ High Temperature Control
⦁ Liquid Temperature Control
⦁ Low Level Control
⦁ Vapor Up Control
⦁ Manual Spray Wand

Reliable and versatile milling machine featuring a 1.5 HP motor, dual-voltage capability, and a precision Acu-Rite 2-axis DRO. Ideal for general machining in industrial or educational settings.
Location: OH

COIL CAR 20,000 LBS X 48″

ROWE COIL REEL 20,000 LBS x 48″
SERIAL R35280.5
MODEL 200048 DSJ
COIL ID 19″ TO 24.5″
COIL OD 60″
SPEED 150FPM
PUMPKIN TOOTH MANDREL
HOLD DON ARM

THREADING TABLE
HYDRAULIC LIFT

LEVELLER
SERIAL 28100-6
MODEL VKL RH 66/1.750-19/7 4 HI PR
WIDTH 66″
CAPACITY 48″ x .020 to .080″ @80K YIELD
ROLLS 13
BACK UP 4 HI
ROLL DIAMETER 1.75″
SPEED 75 FPM MAXIMUM
5 ROLL BANK ADJUSTMENT

HERR VOSS SHEAR
SERIAL 28100-8
MODEL 0308
CAPACITY .1875″

STACKING TABLE
SHEET LENGTH 24″ TO 144″

CRANE UNLOADING SYSTEM

CONTROLS

2001 Makino A99 Used CNC Horizontal Machining Center with a Pro 3 CNC Control, 10,000 rpm, CAT 50 Spindle Taper and 90 Station ATC.

2000 Mazak SQT-200MSY CNC Lathe with bar feeder available. Features include 20.67″ swing, 11.9″ turning diameter, and 22.63″ center distance. Equipped with an 8″ chuck, 2″ bar capacity, 5000 rpm spindle speed, and a 25 hp motor. Machine has a Sub spindle.

2005 Makino V77 CNC Vertical Machining Center – HSK-63, 20,000 rpm

The 2022 WEISSER Artery M-2R TM is a state-of-the-art 5-axis CNC lathe engineered for high-precision, high-speed machining across complex geometries. Featuring the Siemens Sinumerik 840D sl control system with Safety Integrated, this machine delivers exceptional versatility with a swiveling B-axis and a powerful 13.8″ chuck capable of reaching speeds up to 5,700 RPM. With low hours and meticulously maintained, this unit is ideal for demanding production environments requiring dynamic turning and milling capabilities. Comes equipped with additional filtration units, spare parts, and live tooling accessories.

Used 2002 DOOSAN DMV-4020D Vertical Machining Center. Features include 3-axis motion, 47.2″ x 19.7″ table and 24 ATC Capacity. Reliable Fanuc 21i-M CNC control for precision and ease of operation

The Voortman V630 is a high-performance beam processing machine designed for precision and efficiency. Capable of drilling, milling, countersinking, thread tapping, numbering, and marking, it processes both the web and flanges simultaneously to maximize throughput. Ideal for structural steel fabrication.

50″ VB1250 saw is included in the price, as well as 60′ infeed and outfeed with double drag dogs on the infeed.

Location: WI

The 2001 Schuler SMG 2500 Ton Stamping Press is available used, offering a high-capacity solution for heavy-duty metal forming and stamping applications. Known for its robust German engineering and long-lasting performance, this mechanical press delivers up to 2500 tons of force, making it ideal for large-scale automotive, appliance, and industrial part production. Built for precision and repeatability, the SMG 2500 is designed to handle high-volume stamping operations with maximum efficiency.

2002 HAAS VF-3B Vertical Machining Center, used condition. Features: Classic CNC Control, 3-axis, CAT-40 spindle and 24 ATC.

The ABB 2500A Spectra Series Copper EJBBAFQNZZZZZZZ Power Takeoff Box is a new and rugged power distribution solution, designed to deliver safe and efficient power connectivity in heavy-duty industrial environments. This splash-proof takeoff box is part of ABB’s trusted Spectra Series, built for 3-phase, 600V systems with a 3-ground configuration. With a 2500-amp capacity and copper construction, it ensures low-resistance connections and dependable current flow. Ideal for applications where durability, performance, and safety are critical, this power takeoff box is a key component for scalable and secure busway installations.