This listing is for a NEW Allen-Bradley 2094-XNBRKT-1. It is designed as a mounting bracket for Kinetix 6000 PR (Power Rail) and LIM (Linear Induction Motor) modules. This unit is categorized as a servo drive accessory and includes the following capabilities: secure mounting, compatibility with Kinetix 6000 series, and durable construction for industrial environments.

This listing is for a NEW Joslyn Clark DP3C303-120. It is designed for switching and controlling electrical loads in HVAC and industrial applications. This unit is categorized as a Definite Purpose Contactor and includes the following capabilities: 30 AMP FLA, 3 poles, Coil 120V, 50/60Hz.

This listing is for a NEW General Electric P9MSMXON Knob Selector Switch. It is designed for use in industrial control panels to provide manual operator interface for machine functions. This unit is categorized as a selector switch assembly and includes the following capabilities: Satin chrome body, black knob, compatible with C-2000 push button series.

This listing is for a NEW General Electric 080BF10V. It is designed as an auxiliary contact block for use with contactors and motor starters. This unit is categorized as a contact accessory and includes the following capabilities: 10 Amp rating, 660 VAC maximum, same polarity above 300 VAC.

This listing is for a NEW Allen Bradley 194L-E16-1753. It is designed as a load switch for industrial control applications. This unit is categorized as a disconnect/load switch and includes the following capabilities: 16 Amp rating, 3 poles, OFF-ON operation, front/door mounting.

This listing is for a NEW Allen Bradley 100-MCA02. It is designed as an auxiliary contact block for motor starters and contactors. This unit is categorized as a control accessory and includes the following capabilities: 2 normally open contacts, snap-on mounting, and compatibility with Allen Bradley 100-C series contactors.

This listing is for a USED MOELLER ZM-4-PKZ2. It is designed for motor protection applications in industrial electrical systems. This unit is categorized as a motor protection circuit breaker and includes the following capabilities: manual motor starting, overcurrent protection, and compatibility with PKZ2 series accessories.

This listing is for a NEW Schneider 140XTS00200. It is designed for use in industrial automation systems requiring modular controller integration. This unit is categorized as a controller module and includes the following capabilities: compact form factor, compatibility with Modicon Quantum systems, and DIN rail mounting.

This listing is for a NEW 5-Pack of Cutler-Hammer D2PR4 relay sockets. These 4-pole sockets are designed for mounting industrial relays in control panels and electrical systems. This unit is categorized as a relay socket and includes the following capabilities: 4-pole configuration, DIN rail mount compatibility, and durable plastic housing.

This listing is for a NEW SIEMENS 6SL3064-1BB00-0AA0. It is designed as a SIMATIC spacer for 50mm control units in automation systems. This unit is categorized as a mechanical accessory and includes the following capabilities: structural spacing, panel integration, and compatibility with Siemens SIMATIC hardware.

This listing is for a NEW POWER-SONIC PS-6100. It is designed for general purpose and standby power applications. This unit is categorized as a sealed lead acid battery and includes the following capabilities: 6V output, 12Ah capacity, and maintenance-free operation.

This listing is for a NEW PEPPERL+FUCHS NBB15-L2-A2-C-V1. It is designed for non-contact object detection in industrial automation systems. This unit is categorized as an inductive proximity sensor and includes the following capabilities: 15mm sensing range, flush mountable design, and 3-wire DC operation.

This listing is for a USED CONTROL CONCEPTS IE-110. It is designed for high-frequency noise suppression and surge protection in industrial power systems. This unit is categorized as a surge suppressor and includes the following capabilities: 120V AC input, 10A output current, and 45kA peak surge capacity.

This listing is for a USED VENTURE V90D6413. It is designed for powering metal halide lamps in commercial and industrial lighting systems. This unit is categorized as a core and coil ballast and includes the following capabilities: 400W lamp support, M59 lamp compatibility, and high-voltage operation.

This listing is for a USED VENTURE V90D6413. It is designed for powering metal halide lamps in commercial and industrial lighting systems. This unit is categorized as a core and coil ballast and includes the following capabilities: 400W lamp support, M59 lamp compatibility, and high-voltage operation.

This listing is for a NEW BradConnectivity 103002A01F060. It is designed for industrial connectivity applications requiring a 3-pin male cordset. This unit is categorized as a cordset and includes the following capabilities: straight male connector, 6-foot cable length, and durable molded construction.

This listing is for a USED Schmersal SRB-301ST. It is designed for safety signal processing in industrial control systems. This unit is categorized as a safety relay and includes the following capabilities: 3 safety contacts, 1 signaling output, and compatibility with contact sensors.

This listing is for a USED Balluff BNI DNT-302-000-Z005. It is designed for decentralized automation and fieldbus integration in DeviceNet networks. This unit is categorized as an I/O interface module and includes the following capabilities: rugged housing, efficient data exchange between sensors and actuators, and compact DIN rail mounting.

This listing is for a used Allen Bradley 1734 OW4/C Point I/O Module.
Relay output module for Point I/O systems in industrial automation applications.

Item is clean and was removed from a working system. See photos for details.

Part No: 1734 OW4/C
Type: Point I/O Output Module
Condition: USED

Please message us with any questions.

This listing is for a USED Littelfuse LFD35533. It is designed for high-current power distribution in industrial electrical systems. This unit is categorized as a power distribution block and includes the following capabilities: 600V rating, 380A copper capacity, and 3-pole configuration.

This listing is for a USED ABB AL9-30-10 with TA25-DU. It is designed for motor control and overload protection in industrial automation systems. This unit is categorized as a contactor and thermal overload relay combo and includes the following capabilities: 3 normally open contacts, integrated thermal protection, and DIN rail mounting.

This listing is for a USED Allen Bradley 1769-IQ32.

CompactLogix 32-point digital input module designed for 24V DC sink/source applications. Ideal for industrial automation systems requiring high-density input capability.

See photos for details.

Part No: 1769-IQ32
Type: Digital Input Module
Condition: USED
32 Inputs (8 points/group)
Voltage: 24V DC Sink/Source
DIN Rail or Panel Mount
Certified for Hazardous Locations
Please message us with any questions.

This listing is for a USEDFANUC A05B-2316-C105.

3-Slot Backplane Rack Module for FANUC RJ2/RJ3/RJ3iB robot controllers.
See photos for details.

Part No: A05B-2316-C105
Type: 3-Slot Backplane / Control Rack
Condition: USED
Slots: 3
Material: Industrial-grade plastic and metal
Dimensions: Approx. 15″ × 6.8″ × 4.8″
Compatible Controllers: RJ2 / RJ3 / RJ3iB
Please message us with any questions.

This listing is for a used Siemens 6ES7 158-3AD01-0XA0 interface module.

The IM153-1 connects ET 200M I/O modules to a PROFIBUS-DP master and is compatible with Siemens S7-300/400 automation systems. This is the updated version with improved diagnostic functions and enhanced stability.

Part No: 6ES7 158-3AD01-0XA0
Model: IM153-1 (Enhanced Version)
Interface: PROFIBUS-DP
Power Supply: 24V DC
Mounting: DIN Rail
Condition: USED

This listing is for a New Allen Bradley 1494U-PC1. It is designed to shield and insulate components in electrical disconnect applications. This unit is categorized as a short protective cover and includes the following capabilities: molded construction, arc flash protection, and panel mount compatibility.

This listing is for a NEW SIEMENS 6ES7 321-1BL00-0AA0. It is designed for SIMATIC ET200S distributed I/O systems. This unit is categorized as a digital input module and includes the following capabilities: 16-channel input, 24V DC signal level, and DIN rail mounting

This listing is for a NEW SIEMENS 6ES7 321-1BL00-0AA0. It is designed for SIMATIC ET200S distributed I/O systems. This unit is categorized as a digital input module and includes the following capabilities: 16-channel input, 24V DC signal level, and DIN rail mounting.

This listing is for a NEW SIEMENS 6EP1971-2BA00. It is designed for SITOP UPS systems to expand runtime and capacity. This unit is categorized as an expansion battery module and includes the following capabilities: sealed lead-acid battery technology, 24V DC nominal voltage, and DIN rail mounting for industrial enclosures.

This listing is for a USED ALLEN BRADLEY 1756-L1 + 1756-M1 Ser. A. It is designed for use in ControlLogix systems to provide processor and memory functionality. This unit is categorized as a PLC processor module and includes the following capabilities: modular design, ControlNet communication support, and removable memory module.

This listing is for a NEW SIEMENS 6ES7 392-1BJ00-0AA0. It is designed for SIMATIC S7-300 PLC systems and functions as a 20-pin front connector for module interfacing. This unit is categorized as a PLC peripheral and includes the following capabilities: secure module connection, DIN rail mounting, and compatibility with Siemens automation systems