This listing is for a NEW Allen Bradley CB-013. It is designed for use as a replacement coil in Size 0–1 motor starters. This unit is categorized as a contactor coil and includes the following capabilities: 24V AC voltage rating, 60Hz frequency, and screw terminal connection.

This listing is for a USED Allen Bradley 100-A09ND3 contactor paired with a 193-BSB22B overload relay. It is designed for motor control and protection in industrial automation systems. This unit is categorized as a contactor and overload relay set and includes the following capabilities: DIN rail mounting, thermal overload protection, and compatibility with standard control panels.

This listing is for a NEW GE IC220PWR001C. It is designed for supplying 24VDC power to VersaMax PLC modules. This unit is categorized as a power terminal and includes the following capabilities: compact DIN rail mountable design, factory-sealed packaging, and compatibility with VersaMax systems.

This listing is for a NEW PARKER 14R118FC. It is designed for regulating compressed air pressure in pneumatic systems. This unit is categorized as a pressure regulator and includes the following capabilities: 1/4″ NPT ports, relieving type, and adjustable pressure range from 2 to 125 PSI.

This listing is for a USED UNKNOWN UFD01931. It is designed for linear motion support in industrial slide assemblies. This unit is categorized as a bearing block and includes the following capabilities: compact form factor, slide rail compatibility, and durable construction.

This listing is for a USED UNKNOWN UFD01940. It is designed for linear motion support in industrial slide assemblies. This unit is categorized as a bearing block and includes the following capabilities: compact form factor, slide rail compatibility, and durable construction.

This listing is for a USED UNKNOWN UFF02521. It is designed for linear motion support in industrial slide assemblies. This unit is categorized as a bearing block and includes the following capabilities: compact form factor, slide rail compatibility, and durable construction.

This listing is for a USED UNKNOWN UFF02521. It is designed for linear motion support in industrial slide assemblies. This unit is categorized as a bearing block and includes the following capabilities: compact form factor, slide rail compatibility, and durable construction.

This listing is for a USED UNKNOWN UFD02274. It is designed for linear motion support in industrial slide assemblies. This unit is categorized as a bearing block and includes the following capabilities: compact form factor, slide rail compatibility, and durable construction.

This listing is for a New Allen Bradley 194E-E32-1753. It is designed for load switching in industrial control applications. This unit is categorized as a front-mount loadswitch and includes the following capabilities: 32A current rating, DIN rail mounting, and on/off rotary operation.

This listing is for a New Allen Bradley 1494F-M2. It is designed for manual operation of flange-mounted disconnect switches. This unit is categorized as a switch handle and includes the following capabilities: robust mechanical design, Series A compatibility, and industrial-grade durability.

This listing is for a New Lot of 7 CBI QY-1(13)-DM-U2-15A-B0. These are DIN rail mountable circuit breakers designed for ultra-fast tripping in sensitive electronic applications. This unit is categorized as a single-pole breaker and includes the following capabilities: 15A rating, U2 trip curve, and 10kA breaking capacity.

This listing is for a USED SIEMENS 6ES7 131-6BF01-0BA0. It is designed for digital input signal processing in SIMATIC ET200SP distributed I/O systems. This unit is categorized as a PLC input module and includes the following capabilities: 16-channel input, compact terminal block design, and DIN rail mounting.

This listing is for a NEW RITTAL CP 6205.100. It is designed for interior mounting of Comfort Panel and Optipanel systems. This unit is categorized as a mounting bracket and includes the following capabilities: durable construction, panel compatibility, and compact form factor for enclosure integration.

This listing is for a NEW BRAD CONNECTIVITY 113030K13M150. It is designed for industrial power and signal transmission. This unit is categorized as a Mini-Change cable and includes the following capabilities: 3-pin male/female ends, 15-meter length, and 16/3 AWG TPE jacket for flexible and durable performance.

TURCK RSSD-RJ45S-441-3M Ethernet Cable, new and ready for use. This high-quality product from trusted manufacturer TURCK ensures reliable connectivity. Perfect for various applications requiring robust cable solutions. Model: RSSD-RJ45S-441-3M. Condition: new.

This listing is for a BRAND-NEW Parker PK252HLL05 piston seal kit (hydraulic cylinder repair kit).

Designed for Parker 2HL, 3LL, and VHL series cylinders with a 2½″ bore. This kit includes factory-quality Viton U-seals, O-rings, and PTFE backup rings—seal class 5 industrial grade.

Part No: PK252HLL05
Condition: NEW (sealed package)
• Bore Diameter: 2.5″
• Seal Materials: Fluorocarbon (Viton) & PTFE
• For use in Parker 2HL, 3LL, VHL cylinders
Includes full kit; brand new, unused, sealed.

Please ask if you need a datasheet or further compatibility confirmation.

This listing is for a NEW TEAC 193077C8-91. It is designed for reading and writing 3.5″ floppy disks in legacy computing systems. This unit is categorized as a floppy disk drive and includes the following capabilities: 1.44MB capacity, IDE interface, and beige bezel for PC compatibility.

This listing is for a USED SQUARE D FAL24015. It is designed for overcurrent protection in electrical distribution systems. This unit is categorized as a Circuit Breaker and includes the following capabilities: 15A current rating, 2-pole configuration, and 240V voltage rating.

This listing is for a NEW MOTOROLA NSN6066A. It is designed for use with Motorola mobile radios and communication systems. This unit is categorized as a Mobile Radio Accessory Cable and includes the following capabilities: secure connection, durable shielding, and OEM-grade compatibility.

This listing is for a NEW lot of 50 COOPER SG2. It is designed for sealing and protecting electrical conduit entries. This unit is categorized as a Sealing Gasket and includes the following capabilities: 3/4″ diameter, rubberized sealing material, and corrosion-resistant construction.

This listing is for a New TR Bearings UCP207-35MM. It is designed for supporting rotating shafts in industrial machinery. This unit is categorized as a pillow block bearing and includes the following capabilities: 35mm bore size, cast iron housing, and self-aligning insert bearing.

This listing is for a NEW INA GG ASE 10. It is designed to house insert bearings for industrial shaft support applications. This unit is categorized as a Cast Iron Pillow Block Housing and includes the following capabilities 203mm outer diameter, 54mm width, undercut slot for end caps, compatible with GG.ASE10-N insert bearings.

This listing is for a NEW SCHNEIDER ELECTRIC 60166 Multi9 C60 Miniature Circuit Breaker.
2-pole, 30A breaker with D-curve tripping for high inrush current applications. Suitable for industrial and commercial panelboards. Features thermal magnetic trip, DIN rail mounting, and 10kA interrupt rating.
See photos for details.
Part No: 60166
Type: Miniature Circuit Breaker (MCB)
Condition: NEW
Amperage: 30 A
Voltage: 120/240 VAC, 60/125 VDC
Trip Curve: D
Interrupt Rating: 10 kA @ 240 V
Mounting: DIN Rail
Trip Type: Thermal Magnetic
Please message us with any questions.

This listing is for a USED INWELD 7014 1/8″ Welding Electrodes 10LB Pack.
General-purpose mild steel electrodes suitable for flat, horizontal, vertical-up, and overhead welding. Designed for AC or DC+ polarity with smooth arc and minimal spatter.
See photos for details.
Part No: 7014
Type: Mild Steel Stick Welding Electrodes
Condition: USED
Specification: AWS A5.1 E7014
Size: 1/8 in / 3.2 mm
Current: 90–140 Amps
Polarity: AC / DC+
Re-Drying: 176°F for 30 minutes
Please message us with any questions.

This listing is for a USED CASTOLIN EUTECTIC XHD 1851 Welding Electrodes.
High deposition bronze-aluminium electrodes designed for joining and anti-wear coatings on components exposed to corrosion and friction. Suitable for cast iron, steel, and aluminum bronze applications.
See photos for details.
Part No: XHD 1851
Type: Bronze-Aluminium Manual Welding Electrodes
Condition: USED
Tensile Strength: 80,000 psi
Yield Strength: 37,000 psi
Hardness: 145 BHN
Applications: Anti-wear coatings, joining dissimilar metals
Features: High deposition, corrosion resistance
Please message us with any questions.

This listing is for a USED Inweld E7014 Welding Electrodes 10LB Container.
General-purpose welding rods suitable for flat, horizontal, vertical-up, and overhead positions. Ideal for mild steel fabrication and repair.
See photos for details.
Part No: E7014
Type: Welding Electrodes
Condition: USED
Specification: AWS A5.1 E7014
Diameter: 3/32″, 1/8″, 5/32″
Weight: 10 lbs / 4.54 kg
Welding Positions: F, H, V-up, OH
Please message us with any questions.

Used equipment available: UNKNOWN type, UNKNOWN manufacturer, UNKNOWN model. Condition noted as used. Ideal for those seeking dependable machinery. Contact for further details and pricing.

This listing is for a USED FANUC A03B-0819-C002.

5-slot I/O Base Unit MDL ABU05A for FANUC automation systems.
Designed for horizontal mounting and integration of multiple I/O modules.
Reliable and compact solution for industrial control cabinets.

See photos for details.

Part No: A03B-0819-C002
Type: I/O Base Unit / Backplane
Condition: USED
5-Slot Horizontal Configuration
Model: ABU05A
Please message us with any questions.

This listing is for a USED WTC 917-0145.

Weld timer module used in resistance welding systems. Provides precise timing control and SSPI output for integration with ABB Medar and other industrial welding controllers.

See photos for details.

Part No: 917-0145
Type: Weld Timer / Timing Input Module
Condition: USED
Single Input Timing Module
SSPI Output
Compatible with ABB Medar Systems
Please message us with any questions.