This listing is for a USED VWR 12621-104 Analog Block Heater.

Reliable single-block dry bath heater ideal for laboratory applications requiring consistent temperature control. Features an analog dial and compatibility with a variety of block inserts (commonly 6 mm x 64-well).

See photos for details.

Part No: 12621-104
Type: Analog Dry Bath Block Heater
Condition: USED
Temperature Range: Ambient +5°C to 120°C
Capacity: 1 Block
Power: 120V, 50/60 Hz
Analog Temperature Control
Please message us with any questions.

This listing is for a NEW Allen Bradley 196-FTA. It is designed as a pneumatic timer for industrial control systems. This unit is categorized as a timing device and includes the following capabilities: On-delay function, adjustable timing range from 0.1 to 180 seconds, and rated for 10A at 300 VAC.

This listing is for a NEW TURCK T4201100. It is designed for proximity sensing applications in industrial environments. This unit is categorized as a proximity sensor and includes the following capabilities: AC/DC voltage compatibility, rugged housing, and reliable detection performance.

This listing is for a USED Allen Bradley 2711P-RN6. It is designed for communication expansion in PanelView Plus HMI systems. This unit is categorized as a communication module and includes the following capabilities: support for DH+/RIO/RS232 networks, plug-in installation, and compatibility with PanelView Plus terminals.

This listing is for a USED ALLEN BRADLEY 1769-PA2/A.

CompactLogix AC power supply module for I/O systems.
Provides 5V and 24V DC output for controller and expansion modules.

See photos for details.

Part No: 1769-PA2/A
Type: CompactLogix Expansion Power Supply
Condition: USED
Input Voltage Range: 85–265 VAC
Output: 2 A @ 5 VDC, 0.8–1 A @ 24 VDC
Output Power: 8 W
Mounting: DIN Rail or Panel
Please message us with any questions

This listing is for a NEW UFI ESF21NFC.

High-efficiency spin-on hydraulic filter designed for industrial and mobile equipment. Features 10-micron microglass media with wire support for durability and consistent filtration. Compatible with systems requiring 1-1/2″ UN thread and 5″ OD filters.

See photos for details.

Part No: ESF21NFC
Type: Spin-On Hydraulic Filter
Condition: NEW
Outer Diameter: 5.0″
Thread Size: 1-1/2″ UN
Length: 7.0″
Micron Rating: 10 Micron (Beta 200)
Max Pressure: 288 PSI
Max Temp: 248°F
Gasket: Buna

Please message us with any questions.

This listing is for a used Allen Bradley Compact I/O module from the 1769 series.
These modules are designed for use with CompactLogix and MicroLogix 1500 systems, offering flexible and scalable I/O expansion.

See photos for details.

Part No: 1769 Series
Type: Compact I/O Module
Condition: USED

Supports digital, analog, and specialty I/O configurations
DIN rail or panel mountable
Integrated removable terminal blocks
Built-in communication bus for module-to-module connection
Compatible with 1769-ADN (DeviceNet) and 1769-AENTR (EtherNet/IP) adapters
Optically isolated field circuits
Rugged tongue-and-groove mechanical locking system

FUJI ELECTRIC BU3EHC-030L Circuit Breaker, new condition. Enhance your electrical systems with this top-quality component designed for reliability and performance. Ideal for various applications, ensuring safety and efficiency.

This listing is for a USED SIEMENS 6EP1333‑3BA10 SITOP PSU200M 24 V/5 A DIN‑rail power supply.

Reliable stabilized PSU with wide AC input (120–500 V) and power‑boost capability. Efficient (~88 %) with low ripple and advanced protection including thermal shut‑down and short‑circuit. Compact design with ±0.1 % output regulation, ideal for industrial PLC/automation systems.

Part No: 6EP1333‑3BA10

Key Specs:
– 24 V DC, 5 A (120 W) output
– Selectable 120–230 V / 230–500 V AC input
– Wide input range: 85–550 V AC
– DIN‑rail; IP20; −25 °C to +70 °C
– Efficiency ≈ 88 %, no‑load loss ~4 W
– Protections: OCP, OVP, SCP, thermal, power‑boost
– Output reg: ±0.1 %, adjustable to 28.8 V

TELEMECANIQUE ATV18U09M2 variable speed drive, a reliable choice for your industrial needs. This used model offers durability and efficiency, crafted by a trusted manufacturer to enhance your drive system’s performance.

This listing is for a NEW Allen Bradley 22B-CCC. It is designed as a communication adapter cover for PowerFlex 4 and 40 series drives. This unit is categorized as a drive accessory and includes the following capabilities: protective enclosure for communication ports, snap-on mounting, and compatibility with multiple adapter modules.

This listing is for a New Rittal PS 4315 110. It is designed as a 3-meter yellow power supply cable with socket for through-wiring applications. This unit is categorized as a power cable and includes the following capabilities: 3-wire configuration, 3000mm length, and industrial-grade insulation.

This listing is for a NEW COOPER BUSSMANN FWP-500A. It is designed for protecting sensitive semiconductor devices in high-speed circuits. This unit is categorized as a High-Speed Semiconductor Fuse and includes the following capabilities: 500A current rating, compact cylindrical body, and fast-acting response.

IKO NURT 40R is a Cylindrical Roller Follower Bearing designed for high-load cam and linear motion applications. This Full Complement Type includes an inner ring and crowned outer ring, offering enhanced durability and shock resistance. Compatible with various industrial automation systems.

This listing is for a NEW DODGE NSTUSC103.
Take-up ball bearing unit with 1-3/16″ bore and narrow slot cast iron housing. Features set screw locking and single lip seal. Designed for fixed, non-expansion applications in industrial machinery.
See photos for details.
Part No: NSTUSC103
Type: Ball Bearing Take-Up Unit
Condition: NEW
Bore Diameter: 1-3/16 in
Mounting: Set Screw Collar
Housing Material: Cast Iron
Slot Width: 0.25 in
Slot to Slot Distance: 3.5 in
Dynamic Load Capacity: 4,368 lbf
Static Load Capacity: 2,538 lbf
Please message us with any questions.

This listing is for a USED OMRON CJ1W-CRM21 CompoNet Master Unit.

The CJ1W-CRM21 is a high-speed communication module for OMRON CJ-series PLCs. It enables remote I/O and message communication with CompoNet slave devices, supporting up to 2,048 I/O points and multiple baud rates for flexible network design.

See photos for details.

Part No: CJ1W-CRM21
Type: CompoNet Master Unit
Condition: USED
Supports up to 2,048 I/O points
Baud rates: 93.75 kbps to 4 Mbps
24 VDC power supply
DIN rail mount (CJ-series backplane)
Please message us with any questions.

ASHCROFT IXLdp is available in new condition. This high-quality equipment from a trusted manufacturer is designed for your professional needs. Contact us today to enhance your operations with this impeccable model.

This listing is for a USED FANUC A05B-2400-C061.

Industrial 4-slot rack backplane used in FANUC RJ3iB robot controller systems. Supports CPU, power supply, and I/O modules.

See photos for details.

Part No: A05B-2400-C061
Type: Rack Chassis / PLC Backplane
Condition: USED
Configuration: 4-slot rack
Application: RJ3iB robot controller
Mounting: Panel mount
Please message us with any questions.

This listing is for a NEW SMC RSDQB32-10D-J79W.

Compact double-acting stopper cylinder from SMC’s RSQ-Z series. Designed for precise stopping and positioning in conveyor and automation systems. Features a 32 mm bore, 10 mm stroke, and auto switch capability for position sensing.

See photos for details.

Part No: RSDQB32-10D-J79W
Type: Compact Stopper Cylinder
Condition: NEW
Bore Size: 32 mm
Stroke Length: 10 mm
Double Acting
Max Pressure: 1.0 MPa
Auto Switch Capable (J79W)
Please message us with any questions.

This listing is for a USED ABB 2CDS251001R0984.

This is a miniature circuit breaker (MCB) rated at 0.5A, single pole, with a C-curve trip characteristic. It mounts on DIN rail and is suitable for industrial control panels and automation systems. Rated for 480VAC and 72VDC applications.

See photos for details.

Part No: 2CDS251001R0984
Type: Miniature Circuit Breaker
Condition: USED
Voltage: 480V AC / 72V DC
Current: 0.5A
Mount: DIN Rail
Poles: 1
Curve: C-Curve
Please message us with any questions.

SIEMENS 6ES7 136-6DB00-0CA0 used PLC Input and Output Modules available. Ideal for integrating and controlling industrial systems with reliable performance. Compact and efficient for various automation needs.

SIEMENS PLC Input and Output Module, model 6ES7 136-6BA00-0CA0, in used condition. Ideal for enhancing industrial automation systems. Reliable choice for those needing robust performance in a practical package.

This listing is for a USED Hirschmann OCTOPUS 16M (GM). It is designed for industrial Ethernet networking in harsh environments. This unit is categorized as a managed Ethernet switch and includes the following capabilities: 16 Fast Ethernet ports, IP67 protection for outdoor or rugged use, and Gigabit uplink options for high-speed connectivity.

This listing is for a USED Autonics CT4S-2P2 Counter/Timer Module. It is designed for counting and timing operations in industrial automation systems. This unit is categorized as a Digital Counter/Timer and includes the following capabilities: multi-function operation, panel mounting, and LED display for status indication.

This listing is for a USED IFM II0263 Proximity Switch (IGA2015-AB0A/SL). It is designed for non-contact detection of metallic objects in industrial automation systems. This unit is categorized as an inductive proximity sensor and includes the following capabilities: rugged cylindrical housing, reliable sensing performance, and compatibility with IFM automation systems

This listing is for a USED Allen-Bradley 871P-C13CRF Proximity Switch. It is designed for non-contact detection of metallic objects in industrial automation systems. This unit is categorized as an inductive proximity sensor and includes the following capabilities: rugged cylindrical housing, DC-powered operation, and reliable sensing performance.

This listing is for a NEW Datalogic 93A051240 CAB-6105 Cable M. Slave. It is designed for connecting slave modules in industrial automation systems. This unit is categorized as an industrial communication cable and includes the following capabilities: robust construction, compatibility with Datalogic systems, and reliable signal transmission.

This listing is for a NEW Allen Bradley 871P-C13CRF. It is designed as an inductive proximity sensor for detecting metal objects without physical contact. This unit is categorized as a sensor device and includes the following capabilities: rugged cylindrical housing, high sensing accuracy, and compatibility with industrial automation systems.

This listing is for a NEW Eaton Cutler-Hammer 10250T. It is designed as a selector switch operator for industrial control panels. This unit is categorized as a pilot device and includes the following capabilities: heavy-duty construction, 30mm mounting, and compatibility with Eaton 10250T series components.

This listing is for a NEW 6-Pack of SQUARE D B1.03 thermal overload heater units. These are designed for use with Square D B-Series contactors and motor starters. This unit is categorized as an overload protection accessory and includes the following capabilities: thermal trip functionality, compatibility with B-Series contactors, and compact installation.