MITSUBISHI A6TBXY36 PLCs/Machine Control unit available now. Brand new condition, ready to optimize your operations with reliable machine control. Secure this essential piece of equipment today for enhanced performance and efficiency.

This listing is for a USED KUKA 27V NT KRC2.

Power supply unit designed for use with KUKA KRC2 robotic controllers. Provides stable 27.3V DC output for powering internal systems and peripherals.

See photos for details.

Part No: 27V NT KRC2
Type: Power Supply Unit
Condition: USED
Input Voltage: 400–580 VAC
Output Voltage: 27.3 VDC
Output Current: Up to 40 A
Please message us with any questions.

This listing is for a brand‑new Balluff BCC060W cable.

• 5 m yellow TPE cable, drag‑chain compatible
• M12×1 female angled (5‑pin A‑coded) → M12×1 male straight (4‑pin A‑coded)
• 4‑core cable, rated 250 V/DC/AC, 4 A
• IP67/IP68/IP69K protection
• Cable temp rating: -50…105 °C (fixed), -25…105 °C (flexible)
Ideal for sensor or actuator wiring in industrial automation systems.
—
Part #: BCC060W
Condition: NEW, factory sealed

Please message for order quantities or technical questions!

This listing is for a USED Flex-Core Potential Transformer, model 3AUA000001132 (Cat. 460-480).

Industrial-grade voltage transformer for monitoring 480 V systems. Provides a 4:1 reduction ratio to step primary voltage down to 120 V for meters or relays.

Part No: 3AUA000001132
Type: Potential Transformer
Primary Voltage: 480 V
Ratio: 4:1
Thermal Rating: 150 VA @ 30°C
Accuracy: 0.6%
Class: 1, 600 V insulation, 10 kV BIL
Frequency: 60 Hz
Condition: USED

Please see photos and verify compatibility with your system.

This listing is for a USED ANTUNES CONTROL 21HT5K0Y160-S solenoid gas valve.

This is a 120V AC normally closed solenoid valve used for controlling gas flow in commercial appliances, burners, or heating systems. It is suitable for low-pressure natural gas or propane applications.

See photos for details.

Part No: 21HT5K0Y160-S
Type: Solenoid Gas Valve
Condition: USED
Voltage: 120V AC
Normally closed
Rated for low-pressure gas (up to 5 PSI)
Please message us with any questions.

This is a compact hydraulic pump unit powered by a 24V DC motor. It is typically used in industrial automation, mobile equipment, or hydraulic test benches where low-voltage hydraulic actuation is needed.

See photos for details.

Part No: WH42-GO2-B2-DC24
Type: DC Hydraulic Pump Unit
Condition: USED
24V DC motor-driven pump
Compact and enclosed design
Suitable for mobile or compact hydraulic systems
Please message us with any questions.

This listing is for a NEW FANUC A03B-0815-K100 I/O Module Base Unit.

This FANUC I/O rack base provides the mounting and electrical backplane for digital and analog I/O modules. Commonly used in CNC control systems such as 0i, 30i, and 31i series.

See photos for details.

Part No: A03B-0815-K100
Type: I/O Rack Base / Backplane
Condition: USED
Compatible with FANUC Series 0i/30i/31i/32i
Used for DI/DO/AI/AO module mounting
Please message us with any questions.

This listing is for a USED HARDINGE FG 00030100090 Cable Assembly.

OEM CNC interface or internal cable, typically used with Hardinge machine tools. Suitable for use as a replacement or spare in compatible Hardinge equipment.

See photos for details.

Part No: FG 00030100090
Type: CNC Cable Assembly
Condition: USED
OEM Hardinge interface cable
Application: CNC machines / automation
Please message us with any questions.

This listing is for a USED BINDER 79-5033-50-04 connector cable.

See photos for details.

Part No: 79-5033-50-04
Condition: USED
Please message us with any questions.

This listing is for a USED Bosch Rexroth R067022040 Super Linear Bushing.

High-performance linear bushing designed for smooth, precise motion in industrial automation systems. Features integrated wiper seals, steel bearing plates, and optimized ball guide grooves. Supports shaft misalignment and high-speed operation.

See photos for details.

Part No: R067022040
Type: Super Linear Bushing
Condition: USED
Shaft Diameter: 20 mm
Closed-Type Design
Integrated Wiper Seals
Steel Bearing Plates
Supports Speeds up to 5 m/s
Please message us with any questions.

This listing is for a USED Bosch Rexroth 0 822 010 864 Compact Pneumatic Cylinder.

Short-stroke, double-acting pneumatic cylinder with a 50 mm bore and 25 mm stroke. Designed for compact automation applications requiring precise linear motion. Features G 1/8″ ports and rugged aluminum construction.

See photos for details.

Part No: 0 822 010 864
Type: Compact Pneumatic Cylinder
Condition: USED
Bore Size: 50 mm
Stroke Length: 25 mm
Double-Acting Operation
Max Pressure: 10 bar
G 1/8″ Pneumatic Ports
Temperature Range: -25°C to +80°C
Please message us with any questions.

This listing is for a USED PEPPERL+FUCHS RL28-8-H-700-RT/47/105.

Background suppression photoelectric sensor with 20–700 mm detection range.
Features visible red LED, adjustable sensing range, and light/dark switching.
Ideal for precise object detection in industrial automation environments.

See photos for details.

Part No: RL28-8-H-700-RT/47/105
Type: Background Suppression Sensor
Condition: USED
Detection Range: 20–700 mm
Modulated Red LED (660 nm)
2 PNP Outputs, 5-pin M12 Connector
IP67 Rated, ABS Housing
Please message us with any questions.

This listing is for a USED KUKA 27V NT Control Power Module (27 V output) from a KRC2 robot controller.

– Provides regulated +27 V DC supply for KRC2 control logic
– Industrial-grade module; rack or DIN-rail mountable
– Ideal as replacement for KUKA robot system maintenance

Part No: 27V NT
Type: KRC2 Control Power Supply Module
Condition: USED (operational status unverified — sold as-is)

Please confirm input/output specifications and compatibility with your KRC2 cabinet using nameplate details

OMRON S8VK-C48024 DIN Rail Power Supply available. Ideal for efficient power distribution, this used model provides reliable performance. Perfect for those seeking quality equipment at a great value.

JANITZA KUW2/40 250/5A Current Transformer, 1VA, used condition. Ideal for various applications, this quality transformer by JANITZA offers dependable performance in a compact design. Act now for this essential component at a great value!

SIEMENS 6GK5216-0BA00-2AA3 SCALANCE Ethernet Switch available for purchase. Reliable brand, used condition, ideal for network enhancements. Model: 6GK5216-0BA00-2AA3. Perfect for boosting network efficiency with trusted SIEMENS quality.

Phoenix Contact QUINT-BUFFER/24VDC/20 used power supply. Reliable performance in industrial settings. Ideal for backup and maintaining load availability during interruptions. Compact, efficient solution for power stability needs.

SIEMENS 6SL3055-0AA00-5BA3 PLC Sensor Module available. Enhance automation with this reliable used unit from a trusted manufacturer. Ideal for industrial applications. Model: 6SL3055-0AA00-5BA3. Act now to secure this essential component.

VALLEY CRAFT 2960A used material handling equipment. Sturdy and reliable, this model is perfect for efficient transport and organization. Ideal for enhancing productivity in your operations.

LAKESIDE tool cart in great condition, ideal for organizing tools. Unspecified model. Durable and ready for your workshop needs. Suitable for those seeking reliable equipment to enhance efficiency and storage.

This listing is for a USED FANUC A02B‑0319‑K813 Button Host / Teach Pendant Cable.

OEM cable for connecting FANUC teach pendants or button host panels to CNC & servo control cabinets. Ensure compatibility with your FN/Series model.

See photos for connector ends, length verification, and condition.

Part No: A02B‑0319‑K813
Type: Button-host / teach pendant cable
Condition: USED
Approx. Length: ~1.5 m (confirm before shipping)
Connector: OEM FANUC multi-pin (e.g., JA2, CK1/CK27 family)
Please message to confirm connector match and length suitability.

Manufacturer: Straval
Model / Part Number: BPS05-05T-N1329
Series: BPS05
Type: Back Pressure Regulating Valve
Bore Size / Voltage / Flow / Pressure / Stroke: 5 GPM flow rate, adjustable pressure range (typically up to 150 psi, confirm for unit)
Port Size / Thread Type: 1/2″ NPT Threaded Ports
Material / Build: 316 Stainless Steel body
Operating Pressure: Up to 150 PSI (typical)
Operating Temperature: Up to 400°F (varies by seal type)
Ingress Protection / Standards: Industrial-grade, no IP rating specified
Country of Origin: USA

SIEMENS 3RV2011-4AA10 Circuit Breakers, new condition. Ideal for reliable electrical protection, these breakers provide excellent performance and durability for various applications. Ensure operational efficiency with trusted Siemens quality.

FUKUTA R4DKH0025B02-8 motor, new and ready for your industrial needs. Quality manufacturing combined with a robust design makes this motor ideal for various applications. Enhance your operations with reliable performance.

Explore the new FUKUTA R4DKH0025D01 motor, expertly crafted for high-performance applications. With cutting-edge design and reliability, this motor ensures optimal functionality for your needs.

GLOBAL SERIES GFC Power GHOF 2-15, a discontinued 15V, 3A power supply. This used model is part of the reliable 2 Series lineup, perfect for those seeking quality in older equipment. Act now, limited availability.

GFC Power GHOF 2DA REV A power supply, used. Ideal for those in need of reliable electrical solutions. Manufactured by GFC Power, this dependable unit offers a practical choice for your power supply needs.

Used equipment available: Manufacturer and model are unspecified, categorized as “Other” type. This pre-owned item is in used condition, ideal for various applications needing generic equipment solutions. Contact for more details.

Used CHEN YING V06C9013 equipment available. This versatile unit offers reliable performance in a range of applications. Ideal for businesses seeking cost-effective solutions. Contact for more details.

EMHART E475B Circuit Board available. Model E475B by EMHART, pre-owned and in good condition, ideal for various industrial applications. Secure this reliable component for your system enhancements today.