This listing is for a NEW Allen Bradley 802M-BAJ9. It is designed for position detection and control in industrial automation systems. This unit is categorized as a limit switch and includes the following capabilities: sealed housing, mechanical actuator, and rugged design for harsh environments.

This listing is for a USED FANUC A16B-3200-0450/05E.

Main PCB CPU Board for FANUC RJ3iB Controllers. Stores robot programs and configurations, and controls servo positioning.

See photos for details.

Part No: A16B-3200-0450/05E
Type: Main PCB / CPU Board
Condition: USED
Microprocessor and Memory Integrated
Operator Panel Control Circuit
2-Slot Backplane
Dimensions: 6.6″ H × 4.7″ W × 14.9″ L
Made in Japan
Please message us with any questions.

This listing is for a USED MCNAUGHTON-McKAY MCMCCP2-ETH-GF. It is designed as a convenience panel for industrial and commercial electrical setups. This unit is categorized as a power distribution accessory and includes the following capabilities: integrated Ethernet port, GFCI outlet, and compact faceplate configuration.

This listing is for a NEW SIEMENS 6ES7 331-7KB02-0AB0. It is designed for analog signal acquisition in S7-300 PLC systems. This unit is categorized as an analog input module and includes the following capabilities: 8-channel input, 13-bit resolution, and compatibility with voltage and current signals.

This listing is for a USED AS-IS LECO RT-120-A. It is designed for hardness verification and calibration in metallurgical testing environments. This unit is categorized as a hardness test block kit and includes the following capabilities: analog dial interface, block-based calibration, and legacy design dated 1986

This listing is for a USED SIEMENS 6ES7 135-4LB02-0AB0. It is designed for analog output functionality in SIMATIC ET200M distributed I/O systems. This unit is categorized as an analog output module and includes the following capabilities: 8-channel output, 15-bit resolution, and DIN rail mounting.

This listing is for a NEW LUMBERG AUTOMATION RST 8-RKT 8-727/5M. It is designed for sensor and actuator connectivity in industrial automation systems. This unit is categorized as a double-ended cordset and includes the following capabilities: 8-position M12 male to M12 female connectors, 5-meter cable length, and IP-rated construction for harsh environments.

This listing is for a NEW RITTAL TS 8612.650. It is designed for mounting components inside TS series enclosures. This unit is categorized as a mounting chassis and includes the following capabilities: 500mm width, steel construction, and compatibility with TS system frames.

This listing is for a NEW RITTAL TS 8612.660. It is designed for mounting and support within TS series enclosure systems. This unit is categorized as a dual system chassis bracket and includes the following capabilities: steel construction, dual mounting configuration, and compatibility with TS enclosure frames.

This listing is for a NEW HIRSCHMANN BAT-CLB-2-N. It is designed as a low-loss RF cable assembly for industrial wireless applications. This unit is categorized as a coaxial cable and includes the following capabilities: 2-meter length, N male to N female connectors, 50 Ohm impedance, and IP65 environmental rating.

This listing is for a New Hirschmann BAT-CLB-2-N M-F. It is designed as a low-loss RF cable assembly with N male to N female connectors. This unit is categorized as a coaxial cable and includes the following capabilities: 2-meter length, 50 Ohm impedance, and IP65 rating.

This listing is for a New Allen Bradley 1494V-FS200. It is designed for high-current trailer disconnect applications using Class J fuses. This unit is categorized as a fuse block and includes the following capabilities: 200A rating, 600V max, 3-pole configuration.

This listing is for a NEW BROWNING VF4S-131. It is designed for mounting on machinery frames to support rotating shafts. This unit is categorized as a 4-bolt flange bearing and includes the following capabilities: 1-15/16″ bore, cast iron housing, and ball bearing insert.

This listing is for a New SCC 941-RT-24. It is designed as a high-output horn speaker for industrial alarm and notification systems. This unit is categorized as a Surveillance & Alarm Speaker and includes the following capabilities: 40W output, 24VDC input, ABS housing with adjustable angle.

This listing is for a New Cooper Bussmann FWP-350A. It is designed for semiconductor protection in high-speed circuits. This unit is categorized as a High Speed Fuse and includes the following capabilities: 350 Amp current rating, 700 VAC / 700 VDC voltage rating, stud-mount bolt-on design.

Dodge 124613 LF-SC-107 light-duty flange ball bearing, featuring a 3-bolt configuration, now available. Perfect for light-duty applications, this brand-new unit ensures premium quality and reliable performance.

This listing is for a Used Giovenzana IP7007. It is designed as a safety foot switch for industrial machinery where hands-free operation is required. This unit is categorized as a Single Pedal Safety Foot Switch and includes the following capabilities: 1 Normally Open contact, IP65 water-resistant housing, yellow protective guard.

This listing is for a NEW B-LOC SERIES B400 85x125mm. It is designed for secure shaft-to-hub connections in rotating equipment. This unit is categorized as a Shaft Locking Device and includes the following capabilities: 85mm bore diameter, 125mm outer diameter, and corrosion-resistant steel construction.

This listing is for a NEW B-LOC SERIES B400 100x145mm. It is designed for secure shaft-to-hub connections in rotating equipment. This unit is categorized as a Shaft Locking Device and includes the following capabilities: 100mm bore diameter, 145mm outer diameter, and corrosion-resistant steel construction.

This listing is for a New ENIDINE LROEMXT 3/4 x 1 XTREME. It is designed for energy absorption and vibration damping in industrial machinery. This unit is categorized as a shock absorber and includes the following capabilities: XTREME series durability, 3/4″ x 1″ size, and high-cycle performance.

This listing is for a used POWERFIST 8 Ton Clevis Bottom Long Ram Hydraulic Jack.
Heavy-duty hydraulic jack ideal for use with engine hoists, cranes, and shop equipment.

Item is clean and was removed from a working system. See photos for details.

Part No: N/A
Type: Long Ram Hydraulic Jack
Condition: USED
Capacity: 8 Ton
Clevis-Style Base
Pneumatic/Hydraulic Operation
Long Ram Design for Extended Reach

Please message us with any questions.

This listing is for a NEW SAMSUNG SND-6084N Network Dome Camera. It is designed for high-resolution surveillance in indoor and outdoor environments. This unit is categorized as a 2MP IP Dome Camera and includes the following capabilities: 1080p @ 60fps, motorized varifocal lens, WDR 120dB, and built-in SD card slot.

TURCK FDNL-CSG88-W is a rugged DeviceNet I/O module featuring 8 digital PNP inputs and 8 digital outputs with short-circuit protection. Designed for decentralized control in harsh environments, it offers IP67 protection and diagnostic capabilities.

This listing is for a NEW GISCO BercoCut Soft EDM Wire.
Soft brass EDM wire designed for high taper cutting and precision spark erosion. Features CuZn37 core, paraffin-free surface, and high elongation for stable performance on Charmilles and other EDM machines.
See photos for details.
Part No: BercoCut Soft
Type: Soft Brass EDM Wire
Condition: NEW
Core Material: CuZn37
Tensile Strength: ~390 MPa / 56,500 PSI
Elongation: >25%
Color: Gold
Please message us with any questions.

This listing is for a USED SIEMENS 6ES7 138-4FA02-0AB0.

Fail-safe digital input module for ET200S distributed I/O systems.
Supports 4 two-channel or 8 single-channel inputs at 24 VDC.
Compliant with SIL3 and Category 4 safety standards.

See photos for details.

Part No: 6ES7 138-4FA02-0AB0
Type: Fail-Safe Digital Input Module
Condition: USED
Input Channels: 4/8 (configurable)
Input Voltage: 24 VDC
Safety Rating: SIL3 / Cat. 4
Mounting: ET200S rack
Please message us with any questions.

This listing is for a USED FANUC A20B-1007-0490/03A.

Emergency stop PCB board with redundant relay control for FANUC automation systems.
Operates at 24V DC and mounts directly to control panels.
Ideal for industrial safety and emergency shutdown applications.

See photos for details.

Part No: A20B-1007-0490/03A
Type: Emergency Stop PCB
Condition: USED
Operating Voltage: 24V DC
Relay Type: Solid-state
Max Current: 5A per relay
Mounting: Panel-mount
Please message us with any questions.

This listing is for a USEDAllen-Bradley 1769-IF4.

CompactLogix 4-Channel Analog Input Module for voltage and current signal acquisition. Ideal for industrial automation and control systems.
See photos for details.

Part No: 1769-IF4
Type: Analog Input Module
Condition: USED
Channels: 4x Analog Inputs
Signal Types: ±10V, 0–10V, 0–5V, 1–5V, 0–20 mA, 4–20 mA
Resolution: 14-bit
Power Supply: 24 VDC
Please message us with any questions.

This listing is for a USED FANUC A20B-2100-0770.

Operator Panel PCB for FANUC R-J3iB Controllers.
Supplies power to Teach Pendant, Indicator Lights, Hour Meter, Safety Board, and more.
Includes steel mounting plate and supports two 1 amp fuses.

See photos for details.

Part No: A20B-2100-0770
Type: Operator Panel PCB
Condition: USED
For FANUC R-J3iB Controllers
Steel Mounting Plate Included
Supports Two 1 Amp Fuses
Please message us with any questions.

This listing is for a USED MOXA NPORT 5410.

4-port RS-232 serial device server designed for industrial Ethernet applications. Supports multiple protocols and configuration modes. Ideal for connecting legacy serial devices to modern networks.

See photos for details.

Part No: NPORT 5410
Type: Serial Device Server
Condition: USED
4 x RS-232 Ports (DB9 male)
10/100 Ethernet (RJ45)
Protocols: TCP Server, TCP Client, UDP, Real COM
Input Voltage: 12–48 VDC
Dual Power Inputs
Please message us with any questions.

This listing is for a NEW HARDINGE DEX 7170901100 AIS Transmission Cable Adapter.

Used for interfacing AIS transmission systems in industrial applications.

See photos for details.

Part No: DEX 7170901100
Type: AIS Transmission Cable Adapter
Condition: NEW
Application: Cable interface for AIS systems

Please message us with any questions.