This listing is for a USED DODGE DGF 1.5 FLEX HUB Gear Coupling. It is designed for industrial shaft coupling applications requiring high torque transmission and misalignment tolerance. This unit is categorized as a Metallic Gear Flex Hub and includes the following capabilities: 1-3/8″ bore, carbon steel construction, and keyway with set screw locking.

This listing is for a NEW MUREX 7024 Welding Electrodes.
High deposition mild steel electrodes designed for flat and horizontal welding. Ideal for large welds and multi-pass applications with minimal spatter and smooth bead appearance.
See photos for details.
Part No: 7024
Type: Mild Steel Stick Welding Electrodes
Condition: NEW
AWS Classification: AWS A5.1 E7024
Welding Positions: Flat, Horizontal
Diameter Options: 1/8″, 5/32″, 3/16″, 7/32″, 1/4″
Current: AC or DC±
Features: High deposition rate, minimal spatter, smooth bead
Please message us with any questions.

This listing is for a NEW INA PACE60-N.
Pillow block ball bearing unit with 60 mm bore and 2-bolt cast iron housing. Features eccentric locking collar and sealed bearing for fixed, non-expansion applications in industrial machinery.
See photos for details.
Part No: PACE60-N
Type: Pillow Block Ball Bearing Unit
Condition: NEW
Bore Diameter: 60 mm
Mounting Type: 2-Bolt Base
Locking Mechanism: Eccentric Collar
Housing Material: Cast Iron
Seal Type: P Seals
Please message us with any questions.

This listing is for a USED STANLEY 20C104605.

5-meter high-flex torque driver cable designed for Stanley E12 Series Nutrunners. Industrial-grade construction with reinforced jacket and proprietary connectors. Ideal for assembly line and torque tool applications.

See photos for details.

Part No: 20C104605
Type: Torque Driver Cable
Condition: USED
Length: 5 meters
Compatible with Stanley E12 Nutrunners
High-flex industrial cable
Please message us with any questions.

This listing is for a NEW Pepperl+Fuchs 053491 Inductive Proximity Sensor.

Compact flush-mount sensor with 0.8 mm sensing range and PNP NO output. Ideal for precision detection in industrial automation environments. IP67 rated with stainless steel housing.

See photos for details.

Part No: 053491 (NBB0.8-5GM25-E2)
Type: Inductive Proximity Sensor
Condition: NEW
Sensing Range: 0.8 mm
Output Type: PNP, Normally Open
Voltage: 10–30 VDC
Frequency: Up to 3000 Hz
Housing: M5 x 0.5 Stainless Steel
Cable: 2 m PVC, 3-wire
Protection: IP67

Please message us with any questions.

This listing is for a USED FUJI SC-N7 Magnetic Contactor.

Industrial-grade 3-pole contactor rated for 220V AC coil voltage. Designed for motor control and switching applications up to 660V. Features arc extinguishing mechanism and snap-on auxiliary contact compatibility.

See photos for details.

Part No: SC-N7
Type: Magnetic Contactor
Condition: USED
Coil Voltage: 220V AC
Poles: 3
Rated Current: ~75A
Rated Voltage: Up to 660V
Mounting: DIN rail or panel
Please message us with any questions.

This listing is for a NEW Allen-Bradley 871D-BW2N730-N3 Inductive Proximity Sensor.

This sensor is designed for in-port cylinder position detection and features a 73 mm probe length with a 2 mm sensing distance. It includes a 3-pin AC mini quick disconnect and supports both AC and DC operation.

See photos for details.

Part No: 871D-BW2N730-N3
Type: Inductive Proximity Sensor
Condition: NEW
Probe Length: 73 mm
Sensing Distance: 2 mm
Normally Open Output
3-pin AC Mini Quick Disconnect
AC/DC Operation

Please message us with any questions.

This listing is for a USED Balluff BNI 10L-302-S01-Z026 I/O Link Interface Module.

This 8-port I/O-Link master module supports PROFINET communication and is designed for rugged industrial environments. It features M12 connectors and an IP67-rated housing for direct machine mounting.

See photos for details.

Part No: BNI 10L-302-S01-Z026
Type: I/O Link Interface Module
Condition: USED
8-port I/O-Link master
PROFINET interface
M12 connectors
IP67-rated housing

Please message us with any questions.

This listing is for a USED Pelco DD4C22 Spectra IV Dome Drive Camera.

PTZ dome drive camera from Pelco’s Spectra IV SE series. Offers high-resolution imaging with 22X optical zoom and low-light sensitivity. Ideal for security and surveillance systems requiring precision and flexibility.

See photos for details.

Part No: DD4C22
Type: PTZ Dome Drive Camera
Condition: USED
1/4″ CCD Sensor, >470 TV Lines
22X Optical Zoom, 12X Digital Zoom
NTSC Format, 0.02 lux Sensitivity
Auto/Manual Focus and Shutter
Requires Compatible Dome Housing
Please message us with any questions.

This listing is for a USED TOHNICHI CSP25N3X10D.

Interchangeable head preset torque wrench designed for precision tightening in industrial applications. Features a secure preset mechanism and audible click at target torque. Ideal for assembly lines and quality control.

See photos for details.

Part No: CSP25N3X10D
Type: Interchangeable Head Preset Torque Wrench
Condition: USED
Torque Range: 5–25 N·m
Length: 195 mm
Weight: 0.65 lbs
Head Type: 10D (head not included)

Please message us with any questions.

This listing is for a USED TENSITRON TR-4000HC. It is designed for measuring tension in fine wire, filaments, and flat materials. This unit is categorized as a mechanical tension meter and includes the following capabilities: 50–4000g tension range, ±8% full scale accuracy, and magnetic dampening with V-groove rollers

Brand new GENERAL ELECTRIC 208C4267G3, type: Other. Ideal for diverse applications, this equipment promises unmatched reliability and performance. Choose GE for quality.

This listing is for a Used PARKER SX6-DRIVE.

The SX6-DRIVE is a microstepping servo drive and indexer from Parker Compumotor, designed for precision motion control applications. It delivers smooth, high-resolution motion and is compatible with SX57 and SX83 drive/motor packages. Ideal for automation systems requiring accurate positioning and speed control.

See photos for details.

Part No: SX6-DRIVE
Type: Microstep Servo Drive / Indexer
Condition: Used
Input Voltage: 95–132 VAC, 50/60 Hz
Output Current: 6 Amps
Integrated Microstepping Indexer
Compatible with SX57 and SX83 Motor Packages
User-Selectable Motor Resolutions (up to 50,800 steps/rev)
Three-State Current Control for Reduced Motor Heating
RS-232C Programmable Interface
Optically Isolated I/O
Compact, Enclosed Design

Please message us with any questions.

This listing is for a NEW BACO LBX15311 Push-Pull Emergency Stop Station.

Industrial-grade 22 mm control station with a 40 mm red mushroom head. Features push-pull maintained action with 1 NO and 1 NC contact configuration. Ideal for emergency stop applications in automation and machinery environments.

See photos for details.

Part No: LBX15311
Type: Emergency Stop Control Station
Condition: NEW
22 mm Panel Mount
40 mm Red Mushroom Head
Push-Pull Maintained Action
1 NO / 1 NC Contacts
Non-Illuminated
Please message us with any questions.

SIEMENS 6GK5791-1PS00-0AA6 Power Supply, model PS 791-1PRO, in used condition. Perfect for those seeking reliable Siemens quality in power supplies. Ideal for various applications needing consistent performance.

SIEMENS power supply model 6GK5791-1PS00-0AA6 available. Designed for reliable performance. Ideal for professionals seeking a dependable power solution in used condition. Enhance your setup with this quality unit from a trusted brand.

MOELLER SN4-025-B17 Switched-Mode Power Supply, 2.5 Amp, now available. Features 1 pole, 24 VDC output, and dual voltage input (115/230 VAC) at 50/60 Hz. New condition, but discontinued by manufacturer. SN4025BI7.

This listing is for a USED BIMBA FO-501-CMT Flat-1 Pneumatic Cylinder.

Compact, double-acting pneumatic cylinder designed for tight-space applications. Ideal for automation, robotics, and industrial machinery.

See photos for details.

Part No: FO-501-CMT
Type: Flat-1 Pneumatic Cylinder
Condition: USED
Bore Size: 2 inches
Stroke Length: 1 inch
Double Acting, Single Rod
Magnetic Piston with Tapped Mounting Holes
Please message us with any questions

This listing is for a NEW Allen Bradley 440R-ZBE820AZ1. It is designed for use in safety control systems requiring expansion relay functionality. This unit is categorized as a safety relay and includes the following capabilities: DIN rail mounting, expansion module design, and compatibility with Guardmaster safety relays.

This listing is for a NEW BALLUFF BCC0HA9 Single-Ended Cordset.

This 15-meter cordset features a 5-pin angled M12 female connector and flying leads for flexible sensor and actuator integration. It is rated for 250V AC/DC and 4A, with a durable TPE jacket and IP67 protection when properly installed.

See photos for details.

Part No: BCC0HA9
Type: Single-Ended Cordset
Condition: NEW
M12 5-pin angled female connector
15-meter cable with flying leads
22 AWG, 250V AC/DC, 4A
Yellow TPE jacket
IP67 rated (when mated)
Please message us with any questions.

This listing is for a USED FANUC SFT-1214004818-000.

Panel accessory module used in FANUC control systems. May serve as an interface or mounting component within CNC or robotic panel assemblies.

See photos for details.

Part No: SFT-1214004818-000
Type: Panel Accessory Module
Condition: USED
Please message us with any questions.

This listing is for a NEW SEW EURODRIVE FBG11B. It is designed for inverter control and configuration in SEW drive systems. This unit is categorized as a keypad control module and includes the following capabilities: plug-in interface, integrated display and keypad, and compatibility with MOVITRAC and MOVIDRIVE inverters.

This listing is for a NEW Siemens HA161234. It is designed for use with Siemens VBII Heavy Duty Safety Switches. This unit is categorized as an auxiliary contact kit and includes the following capabilities: 1 normally open and 1 normally closed contact configuration, compatibility with 30A–600A switches, and 600V voltage rating.

This listing is for a NEW GENERAL ELECTRIC CR151KFC. It is designed for terminal connectivity in industrial electrical systems. This unit is categorized as a terminal block and includes the following capabilities: modular connection points, durable housing, and compatibility with GE control panels.

This listing is for a NEW SIEMENS 6EP1961-2BA21. It is designed for SITOP power supply systems to provide selective protection of 24V DC load circuits. This unit is categorized as a selectivity module and includes the following capabilities: electronic overcurrent protection, 4-channel output, and DIN rail mounting.

This listing is for a New USFilter Type P SPDT NONC Float Switch. It is designed for liquid level detection in industrial tanks and reservoirs. This unit is categorized as a float switch and includes the following capabilities: 30-foot cable, SPDT contact, normally open/normally closed configuration.

This listing is for a NEW TSX QUANTUM 140DDI35300. It is designed for discrete signal input in Modicon Quantum PLC systems. This unit is categorized as a Digital Input Module and includes the following capabilities: 32-point 24VDC input, LED channel indicators, and DIN rail mounting.

The Siemens 8WD4 420-0EA2 is a high-performance siren element designed for use in SIRIUS 8WD44 signaling columns with a 70 mm diameter. It provides reliable acoustic signaling in industrial environments.

Key Features:
Type: Multi-tone siren element
Sound Output: Up to 102 dB
Tones: 8 selectable tones
Volume: Adjustable
Color: Black
Operating Voltage: 24 V AC/DC
Current Consumption: Max. 30 mA
Tone Frequencies: Ranges from 0.9 kHz to 3.5 kHz
Protection Rating: IP65 – dust-tight and protected against water jets
Material: Polycarbonate (PC)
Mounting Method: Bayonet
Dimensions: Diameter 70 mm, Height 54 mm
Operating Temperature: -20°C to +50°C
Service Life: Approx. 5,000 hours
Compliance: RoHS, REACH, WEEE directives
Country of Origin: Germany

This listing is for a NEW OSBORN VLR-3 1/2.
Heavy-duty V-groove cam follower designed for industrial material handling and process conveying. Features a 3.5″ roller diameter, stainless steel construction, and double row ball bearings for high load capacity.
See photos for details.
Part No: VLR-3 1/2
Type: V-Groove Cam Follower
Condition: NEW
Roller Diameter: 3.5000 in
Roller Width: 1.6875 in
Point Diameter: 2.2500 in
Thread Size: 7/8-14
Radial Dynamic Load Capacity: 5,190 lbf
Radial Static Load Capacity: 2,270 lbf
Please message us with any questions.

This listing is for a used FEC NFT 211RH1C SB Nutrunner.
Industrial nutrunner tool designed for precise tightening of fasteners in assembly applications.

Item is clean and was removed from a working system. See photos for details.

Part No: NFT 211RH1C SB
Type: Nutrunner
Condition: USED

Please message us with any questions.